Yang, B., Feng, Y., Béguin, C., Causse, P., & Wang, J. (2025). Open source tool for Micro-CT aided meso-scale modeling and meshing of complex textile composite structures. Composites Science and Technology, 259, 110940 (11 pages).
Répertoire des expertises
Béguin, Cédric
Répertoire des expertises
Béguin, Cédric
Répertoire des expertises
Publications par date
Article de revue (26)
Communication de conférence (33)
Livre
Chapitre de livre
Brevet
Rapport
Thèse (2)
Ensemble de données (2)
Ressource pédagogique
Image
Enregistrement audio
Enregistrement vidéo
Autre
Cédric Béguin (63)
- 2025 (2)
Article de revue Article de revue Yang, B., Béguin, C., Causse, P., Feng, Y., & Wang, J. (2025). Tomographic modeling and internal structure analysis of engineering textiles: A parametric approach. Composite Structures, 352, 17 pages.
- 2024 (4)
Article de revue Barbeau, L., Golshan, S., Deng, J., Étienne, S., Béguin, C., & Blais, B. (2024). High-order moving immersed boundary and its application to a resolved CFD-DEM model. Computers & Fluids, 268, 106094 (14 pages).Ensemble de données Yang, B., Béguin, C., Causse, P., & Wang, J. (2024). PolyTex: A parametric textile geometry modeling package [Ensemble de données].Article de revue Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2024). Solid–fluid force modeling: insights from comparing a reduced order model for a pair of particles with resolved CFD-DEM. International Journal of Multiphase Flow, 178, 104882 (23 pages).
Article de revue Dhar, L., Recchia, G., Anne, F., Béguin, C., Étienne, S., Côté, P., & Bornard, L. (2024). Two-phase flow properties for air sheets injected from rectangular slots in high-velocity crossflow. International Journal of Heat and Mass Transfer, 236, 126278 (13 pages).
- 2023 (4)
Communication de conférence Ledoux, T., Anne, F., Béguin, C., Gosselin, F., & Étienne, S. (juin 2023). An experimental study on vortex induced motion of a submerged cylindrical buoy with a short tether chain [Communication écrite]. ASME 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), Univ Melbourne, Melbourne, AUSTRALIA (10 pages).Communication de conférence Horriche, Z., Étienne, S., Béguin, C., & Brosset, L. (juin 2023). Numerical Study of the Influence of Weber and Reynolds Numbers on Global Wave Shapes Before Impact [Communication écrite]. 33rd International Ocean and Polar Engineering Conference (ISOPE 2023), Ottawa, ON, Canada.Communication de conférence Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (juillet 2023). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom.Article de revue Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages).
- 2022 (8)
Article de revue Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22.Article de revue Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416.Communication de conférence Trochu, F., Yang, B., Wang, J., Béguin, C., & Causse, P. (juin 2022). Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.Article de revue Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2022). Development of a high-order continuous Galerkin sharp-interface immersed boundary method and its application to incompressible flow problems. Computers & Fluids, 239, 13 pages.Article de revue Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages.Article de revue Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). How a ball free to orbit in a circular track mitigates the galloping of a square prism. Nonlinear Dynamics, 111(1), 179-197.Article de revue Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). Multi-ball rotative nonlinear energy sink for galloping mitigation. Journal of Sound and Vibration, 526, 8 pages.Article de revue Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251.
- 2021 (3)
Article de revue Dhar, L., Anne, F., Recchia, G., Étienne, S., Béguin, C., Scott, D., & Bornard, L. (2021). Bubble characteristics from injected air sheet through slots in a water cross-flow. International Journal of Multiphase Flow, 142, 12 pages.Article de revue Zoghlami, S., Béguin, C., Teyssedou, A., Scott, D., Bornard, L., & Étienne, S. (2021). Bubble cloud configuration effect on the added mass. Physics of Fluids, 33(5), 14 pages.Article de revue Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2021). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink. Journal of Fluids and Structures, 100, 103169 (13 pages).
- 2020 (3)
Communication de conférence Vautrin, Y., Muller, É., Pelletier, D., Étienne, S., & Béguin, C. (janvier 2020). Automatic adaptive remeshing for unsteady interfacial flows with surface tension [Communication écrite]. AIAA Scitech Forum, Orlando, FL, USA.Article de revue Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2020). Numerical study of the influence of weber and reynolds numbers on the development of kelvinhelmholtz instability. International Journal of Offshore and Polar Engineering, 30(2), 129-140.Ensemble de données Selwanis, M., Rishmawi, S., Franzini, G., Béguin, C., & Gosselin, F. (2020). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink [Ensemble de données].
- 2019 (2)
Communication de conférence Zoghlami, S., Béguin, C., Étienne, S., Teyssedou, A., Scott, D., & Bornard, L. (septembre 2019). Small bubble cloud configuration effect on added mass for euler-euler modeling [Communication écrite]. 38th IAHR World Congress, Panama City, Panama.Communication de conférence Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (septembre 2019). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Communication écrite]. 38th IAHR World Congress, Panama City, Panama.
- 2018 (4)
Communication de conférence Bouvard, J.-L., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). Characterization of bubble cloud quality and evolution using optical probes [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan.Article de revue Garapin, J., Béguin, C., Étienne, S., Pelletier, D., & Molin, B. (2018). Non linear model of rotational galloping of square, rectangular and bundle cylinder in cross-flow. [Modélisation non-linéaire du galop en rotation pour des cylindres de sections carrées et rectangulaires]. Houille Blanche-Revue Internationale de l'Eau, 104(1), 11-17.Communication de conférence Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (juin 2018). Numerical study of the influence of weber and reynolds numbers on the development of Kelvin-Helmholtz instability [Communication écrite]. 28th International Ocean and Polar Engineering Conference (ISOPE 2018), Sapporo, Japan.Communication de conférence Zoghlami, S., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). The role of added mass in the dispersion of bubble clouds [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan.
- 2017 (3)
Article de revue Béguin, C., Étienne, S., & Pettigrew, M. J. (2017). Effect of dispersed phase fraction on the drag coefficient of a droplet or a bubble in an idealized two-phase flow. European Journal of Mechanics, B/Fluids, 65, 339-349.Communication de conférence Frigo, J. B., Béguin, C., Hay, A., Étienne, S., & Pelletier, D. (juin 2017). Spanwise force correlation of rotating square cylinders in three-dimensional cross-flow [Communication écrite]. 27th International Ocean and Polar Engineering Conference, San Francisco, California.Article de revue De Kerret, F., Béguin, C., & Étienne, S. (2017). Two-phase flow pattern identification in a tube bundle based on void fraction and pressure measurements, with emphasis on churn flow. International Journal of Multiphase Flow, 94, 94-106.
- 2016 (2)
Communication de conférence De Kerret, F., Benito, I., Béguin, C., Pelletier, D., & Étienne, S. (juillet 2016). Two-phase flow pattern recognition in a varying section based on void fraction and pressure measurements [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages).Article de revue Béguin, C., Pelletier, É., & Étienne, S. (2016). Void fraction influence on added mass in a bubbly flow. European Journal of Mechanics - B/Fluids, 56, 28-45.
- 2015 (5)
Article de revue Charreton, C., Béguin, C., Yu, K. R., & Étienne, S. (2015). Effect of Reynolds number on the stability of a single flexible tube predicted by the quasi-steady model in tube bundles. Journal of Fluids and Structures, 56, 107-123.Article de revue Pelletier, É., Béguin, C., & Étienne, S. (2015). Experiments of air bubbles impacting a rigid wall in tap water. Physics of Fluids, 27(12), 16 pages.Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juillet 2015). Fluidelastic instability in tube arrays subject to two-phase cross flow: A porous medium approach [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2015), Boston, MA, United states (10 pages).Communication de conférence Béguin, C., & Étienne, S. (juin 2015). Transverse and rotational galloping of square cylinders at low Reynolds numbers [Communication écrite]. 25th International Ocean and Polar Engineering Conference, Kona, Hawaii, USA.Article de revue Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74.
- 2014 (10)
Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). A porous medium approach to model Fluid-Structure Interactions in tube bundles [Communication écrite]. 22nd Annual Conference of the CFD Society of Canada, Toronto, Ontario.Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). A Porous Medium Formulation for Fluid-Structure Interactions in a Tube Bundle Subject to Two-Phase Cross-Flow [Communication écrite]. AIAA Science and Technology Forum and Exposition 2014 (SCITECH 2014), National Harbor, MD.Communication de conférence Zoghlami, S., Béguin, C., & Étienne, S. (juillet 2014). Development of a numerical model for quasi-periodic forces of two-phase cross flow in tube bundles [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (9 pages).Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part A: Porous medium approach [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, National Harbor, Maryland.Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part B: Two-phase flow modeling [Communication écrite]. 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference 2014, AIAA AVIATION 2014, Atlanta, GA, United states.Communication de conférence Plagnard, T., Béguin, C., & Étienne, S. (juillet 2014). Predicting Fluidelastic Instability in Tube Array With Potential Theory [Communication écrite]. ASME Pressure Vessels and Piping (PVP 2014), Anaheim, California (11 pages).Communication de conférence Pelletier, É., Béguin, C., & Étienne, S. (juillet 2014). Simple model for bubble-wall interaction [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (11 pages).Communication de conférence Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states.Communication de conférence Béguin, C., Pelletier, É., & Étienne, S. (juillet 2014). Void fraction effect on added mass in bubbly flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states.Communication de conférence Béguin, C., Plagnard, T., & Étienne, S. (juillet 2014). Wall proximity and curvature effect on added mass forces in two-phase cross-flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (8 pages).
- 2013 (3)
Communication de conférence Béguin, C., Pelletier, E., & Étienne, S. (juin 2013). Added mass in a bubbly flow : void fraction and wall influence [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec.Communication de conférence Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2013). Fluidelastic instability of tube array in two-phase cross-flow : a porous media approach [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec.Communication de conférence Charreton, C., Béguin, C., Yu, R., & Étienne, S. (juillet 2013). Stability Derivatives in a Parallel Triangular Tube Bundle Subject to Cross-Flow at Moderated Reynolds Number [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2013), Paris, France (10 pages).
- 2012 (1)
Communication de conférence Béguin, C., Étienne, S., Pettigrew, M. J., & Mureithi, N. W. (juillet 2012). A model for drag coefficient in an idealized bubbly two-phase flow [Communication écrite]. 10th International Conference on Flow-Induced Vibration (FIV 2012), Dublin, Ireland.
- 2010 (1)
Thèse Béguin, C. (2010). Modélisation des écoulements diphasiques : amortissement, forces interfaciales et turbulence diphasique. [Thèse de doctorat, École Polytechnique de Montréal].
- 2009 (2)
Communication de conférence Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic.Article de revue Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204.
- 2008 (2)
Communication de conférence Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic.Communication de conférence Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic.
- 2006 (2)
Communication de conférence Béguin, C., Pettigrew, M. J., & Mureithi, N. W. (novembre 2006). Flow Pattern Recognition and Dynamic Characteristics of Two-Phase Cross Flow in Steam Generator Tube Bundles [Communication écrite]. 5th CNS International Steam Generator Conference, Toronto, Ontario.Communication de conférence Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages).
- 2004 (2)
Article de revue Clanet, C., Béguin, C., Richard, D., & Quéré, D. (2004). Maximal deformation of an impacting drop. Journal of Fluid Mechanics, 517, 199-208.Thèse Béguin, C. (2004). Optimisation du contrôle actif de la couche limite par aspiration sur un profil [Mémoire de maîtrise, École Polytechnique de Montréal].
