Directory of Experts

Balazinski, Marek

Directory of Experts

Balazinski, Marek

Directory of Experts

Publications by type

Journal article (106) Conference paper (142) Book Book chapter (5) Patent Report (1) Thesis Dataset Teaching resource Image Audio recording Video recording Other

Marek Balazinski (254)

Journal articles (106)
- 2024
  - Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2024). Effects of tool geometry and fluid on the surface morphology and integrity in scratching TiMMCs. International Journal of Abrasive Technology, 12(2), 147-166.
  - Balazinski, M., Baron, L., Shi, Z., & Escaich, C. (2024). Effects of Tool Geometry and Fluid on the Surface Morphology and Integrity in Scratching TiMMCs. International Journal of Abrasive Technology, 12(2), -.
- 2023
  - Marousi, M., Rimpault, X., Turenne, S., & Balazinski, M. (2023). Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC). Journal of Manufacturing Processes, 86, 208-220.
  - Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2023). Investigation on workpiece microstructure and wheel performance on grinding titanium metal matrix composites. International Journal of Abrasive Technology, 11(4), 293-309.
- 2022
  - Kamalizadeh, S., Niknam, S. A., Balazinski, M., & Turenne, S. (2022). The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC. Metals, 12(11), 18 pages.
  - Jamshidi, M., Châtelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming. International Journal of Advanced Manufacturing Technology, 121(11-12), 8127-8142.
  - Jamshidi, M., Châtelain, J.-F., Rimpault, X., & Balazinski, M. (2022). Tool Condition Monitoring Using Machine Tool Spindle Electric Current and Multiscale Analysis while Milling Steel Alloy. Journal of Manufacturing and Materials Processing, 6(5), 115 (12 pages).
- 2021
  - Zeb, G., Duong, T. L., Balazinski, M., & Le, X. T. (2021). Direct Electroless Deposition of Nickel onto Silicon Nitride Ceramic: A Novel Approach for Copper Metallization of Micro-/Nano-fabricated Devices. Advanced Engineering Materials, 23(2), 8 pages.
  - Kishawy, H. A., Salem, A., Hegab, H., Hosseini, A., & Balazinski, M. (2021). Micro-textured cutting tools: Phenomenological analysis and design recommendations. CIRP Annals, 70(1), 65-68.
  - Slamani, M., Chatelain, J.-F., Il, A., & Balazinski, M. (2021). Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts. Physica A: Statistical Mechanics and its Applications, 570, 20 pages.
  - Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2021). Study of the effects of initial cutting conditions and transition period on ultimate tool life when machining inconel 718. Materials, 14(3), 592 (13 pages).
- 2020
  - Safavi, M., Balazinski, M., Mehmanparast, H., & Niknam, S. A. (2020). Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs). Metals, 10(11), 14 pages.
  - Jamshidi, M., Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2020). Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining. International Journal of Advanced Manufacturing Technology, 106(9-10), 3859-3868.
  - Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2020). Initial Tool Wear Behavior in High-Speed Turning of Inconel 718. Transactions of the Canadian Society for Mechanical Engineering, 44(3), 395-404.
  - Escaich, C., Shi, Z., Baron, L., & Balazinski, M. (2020). Machining of titanium metal matrix composites : progress overview. Materials, 13(21), 5011 (18 pages).
  - Hodonou, C., Kerbrat, O., Balazinski, M., & Brochu, M. (2020). Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft. International Journal on Interactive Design and Manufacturing (IJIDeM), 14(3), 861-873.
- 2019
  - Hodonou, C., Balazinski, M., Brochu, M., & Mascle, C. (2019). Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. International Journal of Advanced Manufacturing Technology, 103(1-4), 1509-1517.
  - Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572.
- 2018
  - Il, A., Chatelain, J.-F., Lalonde, J.-F., Balazinski, M., & Rimpault, X. (2018). An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling. International Journal of Advanced Manufacturing Technology, 97(1-4), 413-426.
  - Niknam, S. A., Kouam, J., Songméné, V., & Balazinski, M. (2018). Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs). Procedia CIRP, 77, 62-65.
  - Vu, N. P., Duong, X. T., Ly, V. A., Nguyen, D. C., Tran, M. D., Phan, Q. T., Balazinski, M., Son, L. T., Zeb, G., & Le, X. T. (2018). Electroless nickel plating onto Plexiglas (R) through simple covalent grafting of vinylpyridine seed layer. Materials & Design, 144, 151-158.
  - Rimpault, X., Balazinski, M., & Chatelain, J.-F. (2018). Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0. Journal of Manufacturing and Materials Processing, 2(3), 62 (7 pages).
  - Caggiano, A., Rimpault, X., Teti, R., Balazinski, M., Chatelain, J.-F., & Nele, L. (2018). Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly. CIRP Annals, 67(1), 483-486.
  - Rimpault, X., Bitar-Nehme, E., Balazinski, M., & Mayer, J. R. R. (2018). Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis. Measurement: Journal of the International Measurement Confederation, 118, 23-28.
  - Provencher, P. R., & Balazinski, M. (2018). Principal component idealizations of the dominant modes of variability in the mechanics of the cutting process in metal turning. International Journal of Advanced Manufacturing Technology, 95(5-8), 1665-1676.
  - Kamalizadeh, S., Niknam, S. A., Asgari, A., & Balazinski, M. (2018). Tool wear characterization in high-speed milling of titanium metal matrix composites. International Journal of Advanced Manufacturing Technology, 100(9-12), 2901-2913.
  - Niknam, S. A., Kamalizadeh, S., Asgari, A., & Balazinski, M. (2018). Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. International Journal of Advanced Manufacturing Technology, 97(1-4), 253-265.
  - Rimpault, X., Il, A., Chatelain, J.-F., Lalonde, J.-F., & Balazinski, M. (2018). Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping. Procedia CIRP, 77, 417-420.
- 2017
  - Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2017). Burr height monitoring while drilling CFRP/titanium/aluminium stacks. Mechanics and Industry, 18(1), 11 pages.
  - Huang, C.-W., Baron, L., Balazinski, M., & Achiche, S. (2017). Comprehensive model optimization in pulp quality prediction: A machine learning approach. PeerJ Preprints, 5, e2949v1.
  - Shaban, Y., Yacout, S., Balazinski, M., & Jemielniak, K. (2017). Cutting tool wear detection using multiclass logical analysis of data. Machining Science and Technology, 21(4), 526-541.
  - Aramesh, M., Attia, H. M., Kishawy, H. A., & Balazinski, M. (2017). Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability. International Journal of Advanced Manufacturing Technology, 92(1-4), 519-530.
  - Niknam, S. A., Balazinski, M., & Songmené, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746.
  - Rimpault, X., Châtelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2017). Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals. CIRP Journal of Manufacturing Science and Technology, 16, 72-80.
- 2016
  - Provencher, P. R., & Balazinski, M. (2016). Automatic identification of feed marks in machined surface roughness profiles by correlating random variations. International Journal of Advanced Manufacturing Technology, 82(5-8), 1305-1315.
  - Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146.
  - Aramesh, M., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Estimating the remaining useful tool life of worn tools under different cutting parameters: A survival life analysis during turning of titanium metal matrix composites (Ti-MMCs). CIRP Journal of Manufacturing Science and Technology, 12, 35-43.
  - Duong, X.T., Mayer, J. R. R., & Balazinski, M. (2016). Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs). International Journal of Refractory Metals and Hard Materials, 60, 169-176.
  - Ghandehariun, A., Kishawy, H., & Balazinski, M. (2016). On machining modeling of metal matrix composites: A novel comprehensive constitutive equation. International Journal of Mechanical Sciences, 107, 235-241.
  - Rimpault, X., Châtelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction. Journal of the International Measurement Confederation, 91, 84-92.
  - Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016). Surface profile topography of trimmed and drilled carbon/epoxy composite. Procedia CIRP, 45, 27-30.
  - Aramesh, M., Shaban, Y., Yacout, S., Attia, M. H., Kishawy, H. A., & Balazinski, M. (2016). Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs). Machining Science and Technology, 20(1), 132-147.
- 2015
  - Kouam, J., Songmené, V., Balazinski, M., & Hendrick, P. (2015). Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy. International Journal of Advanced Manufacturing Technology, 79(5-8), 1325-1334.
  - Shaban, Y., Aramesh, M., Yacout, S., Balazinski, M., Attia, H., & Kishawy, H. (2015). Optimal replacement times for machining tool during turning titanium metal matrix composites under variable machining conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(6), 924-932.
  - Ren, Q., Baron, L., Balazinski, M., Botez, R., & Bigras, P. (2015). Tool wear assessment based on type-2 fuzzy uncertainty estimation on acoustic emission. Applied Soft Computing, 31, 14-24.
  - Shaban, Y., Yacout, S., & Balazinski, M. (2015). Tool Wear Monitoring and Alarm System Based on Pattern Recognition With Logical Analysis of Data. Journal of Manufacturing Science and Engineering, 137(4), 10 pages.
- 2014
  - Guiassa, R., Mayer, J. R. R., Balazinski, M., Engin, Ş., & Delorme, F.-E. (2014). Closed door machining error compensation of complex surfaces using the cutting compliance coefficient and on-machine measurement for a milling process. International Journal of Computer Integrated Manufacturing, 27(11), 1022-1030.
  - Shaban, Y., Meshreki, M., Yacout, S., Balazinski, M., & Attia, H. (2014). Process control based on pattern recognition for routing carbon fiber reinforced polymer. Journal of Intelligent Manufacturing, 28(1), 165-179.
  - Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences, 255, 121-134.
- 2013
  - Kannan, S., Kishawy, H. A., & Balazinski, M. (2013). Analysis of two- and three-body abrasive wear during machining of aluminium-based metal matrix composite. International Journal of Materials and Product Technology, 46(1), 81-94.
  - Slamani, M., Mayer, J. R. R., & Balazinski, M. (2013). Concept for the integration of geometric and servo dynamic errors for predicting volumetric errors in five-axis high-speed machine tools: an application on a XYC three-axis motion trajectory using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 65(9-12), 1669-1679.
  - Ren, Q., Balazinski, M., Jemielniak, K., Baron, L., & Achiche, S. (2013). Experimental and fuzzy modelling analysis on dynamic cutting force in micro milling. Soft Computing, 17(9), 1687-1697.
  - Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2013). Fuzzy cutting force modelling in micro-milling. Journal of Intelligent and Fuzzy Systems, 25(4), 1027-1035.
- 2012
  - Ren, Q., Baron, L., & Balazinski, M. (2012). Fuzzy Identification of Cutting Acoustic Emission With Extended Subtractive Cluster Analysis. Nonlinear Dynamics, 67(4), 2599-2608.
  - Qasaimeh, A., Elektorowicx, M., & Balazinski, M. (2012). GA-Fuzzy decision support system for mercury removal in natural waters. Computational Water, Energy and Environmental Engineering, 1(1), 1-7.
  - Ren, Q., Balazinski, M., & Baron, L. (2012). High-order interval type-2 Takagi-Sugeno-Kang fuzzy logic system and its application in acoustic emission signal modeling in turning process. International Journal of Advanced Manufacturing Technology, 63(9-12), 1057-1063.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., Carrier, B., & Engin, Ş. (2012). Improvement to High-Speed End Mill Boring Accuracy by a Simple Compensation Strategy. Machining Science and Technology, 16(1), 1-19.
- 2011
  - Mascle, C., Balazinski, M., & Ben Mhenni, A. (2011). Effect of roughness and interference on torque capacity of a shrink fitted tool holder. International Journal of Advanced Manufacturing Systems, 13(1), 149-165.
  - Bejjani, R., Shi, B., Attia, H., & Balazinski, M. (2011). Laser assisted turning of Titanium Metal Matrix Composite. CIRP Annals - Manufacturing Technology, 60(1), 61-64.
  - Bejjani, R., Balazinski, M., Shi, B., Attia, H., & Kishawy, H. (2011). Machinability and chip formation of titanium metal matrix composites. International Journal of Advanced Manufacturing Systems, 13(1), 81-96.
  - Kishawy, H. A., Pang, L., & Balazinski, M. (2011). Modeling of tool wear during hard turning with self-propelled rotary tools. International Journal of Mechanical Sciences, 53(11), 1015-1021.
  - Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (2011). TSK fuzzy modeling for tool wear condition in turning processes: An experimental study. Engineering Applications of Artificial Intelligence, 24(2), 260-265.
  - Ren, Q., Baron, L., & Balazinski, M. (2011). Type-2 fuzzy modeling for acoustic emission signal in precision manufacturing. Modelling and Simulation in Engineering, 2011, 1-12.
  - Baron, L., Balazinski, M., & Ren, Q. (2011). Type2 TSK Fuzzy Logic System and its Type1 Counterpart. International Journal of Computer Applications, 20(6), 8-13.
- 2010
  - Slamani, M., Mayer, J. R. R., Balazinski, M., Zargarbashi, S. H. H., Engin, Ş., & Lartigue, C. (2010). Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. International Journal of Advanced Manufacturing Technology, 50(9-12), 1063-1073.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, Ş. (2010). Identification and Compensation of Dynamic Scale Mismatches in High-Speed End Mill Boring Trajectory on CNC Machines. Journal of Manufacturing Science and Engineering, 132(3), 034501-034501.
  - Hassani, S., Bielawski, M., Beres, W., Balazinski, M., Martinu, L., & Sapieha, J.-E. (2010). Impact stress absorption and load spreading in multi-layered erosion-resistant coatings. Wear, 268(5-6), 770-776.
  - Tail, M., Yacout, S., & Balazinski, M. (2010). Replacement time of a cutting tool subject to variable speed. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 224(3), 373-383.
- 2009
  - Khoukhi, A., Baron, L., & Balazinski, M. (2009). Constrained multi-objective trajectory planning of parallel kinematic machines. Robotics and Computer-Integrated Manufacturing, 25(4-5), 756-769.
  - Nault, M. L., Labelle, H., Aubin, C.-É., Sangole, A., & Balazinski, M. (2009). Fuzzy logic assisted surgical planning in adolescent idiopathic scoliosis. Journal of Spinal Disorders & Techniques, 22(4), 263-269.
  - Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2009). Hybrid neuro-fuzzy multi-objective trajectory planning of redundant manipulators. Control and Intelligent Systems, 37(2), 87-96.
  - Woźniak, A., Mayer, J. R. R., & Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology. International Journal of Advanced Manufacturing Technology, 42(5-6), 505-514.
- 2008
  - Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2008). A Hierarchical Neuro-Fuzzy System to Near Optimal-Time Trajectory Planning of Redundant Manipulators. Engineering Applications of Artificial Intelligence, 21(7), 974-984.
  - Hassani, S., Sapieha, J.-E., Bielawski, M., Beres, W., Martinu, L., & Balazinski, M. (2008). Design of Hard Coating Architecture for the Optimization of Erosion Resistance. Wear, 265(5-6), 879-887.
  - Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H., & L'Espérance, G. (2008). Diffusion Wear Mechanism During High-Speed Machining of 7475-T7351 Aluminum Alloy With Carbide End Mills. Wear, 265(11-12), 1793-1800.
  - Hassani, S., Bielawski, M., Beres, W., Martinu, L., Balazinski, M., & Sapieha, J.-E. (2008). Predictive Tools for the Design of Erosion Resistant Coatings. Surface and Coatings Technology, 203(3-4), 204-210.
- 2007
  - Khoukhi, A., Baron, L., & Balazinski, M. (2007). A Projected Gradient Augmented Lagrangian Approach to Multi-Objective Trajectory Planning of Redundant Robots. Transactions of the Canadian Society for Mechanical Engineering, 31(4), 391-405.
  - Klim, Z. H., Szczepanski, P., & Balazinski, M. (2007). Causes and effects of cascading failures in aircraft systems. Diagnostyka, 41(1), 19-26.
  - Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2007). Online prediction of pulp brightness using fuzzy logic models. Engineering Applications of Artificial Intelligence, 20(1), 25-36.
  - Nault, M. L., Labelle, H., Aubin, C.-É., & Balazinski, M. (2007). The Use of Fuzzy Logic to Select Which Curves Need to Be Instrumented and Fused in Adolescent Idiopathic Scoliosis - a Feasibility Study. Journal of Spinal Disorders & Techniques, 20(8), 594-603.
- 2006
  - Kannan, S., Kishawy, H. A., & Balazinski, M. (2006). Flank Wear Progression During Machining Metal Matrix Composites. Journal of Manufacturing Science and Engineering, 128(3), 787-791.
  - Kishawy, H. A., Haglund, A., & Balazinski, M. (2006). Modelling of Material Side Flow in Hard Turning. CIRP Annals - Manufacturing Technology, 55(1), 85-88.
- 2005
  - Kishawy, H. A., Kannan, S., & Balazinski, M. (2005). Analytical Modeling of Tool Wear Progression During Turning Particulate Reinforced Metal Matrix Composites. CIRP Annals - Manufacturing Technology, 54(1), 55-58.
  - Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (2005). Influence of clustering pre-processing on genetically generated fuzzy knowledge bases. Computer Assisted Mechanics and Engineering Sciences, 12(2-3), 207-221.
  - Balazinski, M., & Przybylo, A. (2005). Teaching Manufacturing Processes Using Computer Animation. Journal of Manufacturing Systems, 24(3), 237-243.
- 2004
  - Kishawy, H. A., Kannan, S., & Balazinski, M. (2004). An Energy Based Analytical Force Model for Orthogonal Cutting of Metal Matrix Composites. CIRP Annals - Manufacturing Technology, 53(1), 91-94.
  - Coma, O., Mascle, C., & Balazinski, M. (2004). Application of a Fuzzy Decision Support System in a Design for Assembly Methodology. International Journal of Computer Integrated Manufacturing, 17(1), 83-94.
  - Achiche, S., Balazinski, M., & Baron, L. (2004). Multi combinative strategy to avoid premature convergence in genetically-generated fuzzy knowledge bases. Journal of Theoretical and Applied Mechanics, 42(3), 417-444.
  - Achiche, S., Baron, L., & Balazinski, M. (2004). Real/binary-like coded versus binary coded genetic algorithms to automatically generate fuzzy knowledge bases: A comparative study. Engineering Applications of Artificial Intelligence, 17(4), 313-325.
- 2002
  - Balazinski, M., Czogala, E., Jemielmak, K., & Leski, J. (2002). Tool condition monitoring using artificial intelligence methods. Engineering Applications of Artificial Intelligence, 15(1), 73-80.
  - Achiche, S., Balazinski, M., Baron, L., & Jemielniak, K. (2002). Tool wear monitoring using genetically-generated fuzzy knowledge bases. Engineering Applications of Artificial Intelligence, 15(3-4), 303-314.
- 2001
  - Baron, L., Achiche, S., & Balazinski, M. (2001). Fuzzy decision support system knowledge base generation using a genetic algorithm. International Journal of Approximate Reasoning, 28(2-3), 125-148.
- 2000
  - Wygowski, W., & Balazinski, M. (2000). Improvement of tapping accuracy through multicriteria choice of technological parameters. International Journal for Manufacturing Science and Technology, 2(2), 18-22.
  - Balazinski, M., & Mpako, C. (2000). Improvement of Tool Life Through the Use of Two Discrete Feed Rates During Machining of 4140 Steel. Machining Science and Technology, 4(1), 1-13.
  - Jemielniak, K., & Balazinski, M. (2000). Laboratory versus industrial cutting force sensor in tool condition monitoring. Journal for Manufacturing Science and Production, 3(1), 41-47.
- 1999
  - Songméné, V., & Balazinski, M. (1999). Machinability of graphitic metal matrix composits as a function of reinforcing particles. CIRO annals, 48(1), 139-153.
- 1997
  - Balazinski, M., Czogala, E., & Sadowski, T. (1997). Application of neural and fuzzy logic controllers to control selected mechanical systems. Journal of Intelligent & Fuzzy Systems, 5(2), 139-153.
  - Mayer, J. R. R., Mir, Y. A., Trochu, F., Vafaeesefat, A., & Balazinski, M. (1997). Touch probe radius compensation for coordinate measurement using kriging interpolation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211(B1), 11-18.
- 1996
  - Klim, Z., Ennajimi, E., Balazinski, M., & Fortin, C. (1996). Cutting tool reliability analysis for variable feed milling of 17-4PH stainless steel. Wear, 195(1-2), 206-213.
  - Balazinski, M., Czogala, E., Drwal, A., & Mrozek, A. (1996). Processing of uncertain knowledge in fuzzy decision support system fuzzy-flou. Archives of theoretical and applied computer science, Polish academy of sciences, 8(1-2), 63-74.
  - Trochu, F., Abong, Y., Balazinski, M., & Larbrisseau, P. (1996). Rough machining of free-form surfaces defined by dual kriging. International Journal of Production Research, 34(6), 1603-1623.
  - Dupinet, É., Balazinski, M., & Czogala, E. (1996). Tolerance allocation based on fuzzy and simulated annealing. Journal of Intelligent Manufacturing, 7(6), 1-11.
- 1995
  - Balazinski, M., & Songmené, V. (1995). Improvement of tool life through variable feed milling of inconel 600. CIRP Annals - Manufacturing Technology, 44(1), 55-58.
  - Balazinski, M., & Czogala, E. (1995). Neural networks and their application to machining processes. Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wroclawskiej, Seria: Konferencje, 22, 44-58.
- 1994
  - Balazinski, M., Bellerose, M., & Czogala, E. (1994). Application of fuzzy logic techniques to the selection of cutting parameters in machining processes. Fuzzy Sets and Systems, 63(3), 307-317.
  - Balazinski, M., & Ennajimi, E. (1994). Influence of feed variation on tool wear when milling stainless steel 17-4Ph. Journal of Engineering for Industry, 116(4), 516-520.
Conference papers (142)
- 2023
  - Duong, X. T., Nguyen-Tri, P., Mayer, J. R. R., Luong, C. H., & Balazinski, M. (2023, August). Optimization of Initial Cutting Parameters for a Turning Process Based on the Response Surface Methodology [Paper]. Materials for Sustainable Environmental, Energy, and Bioresource Applications (M2EBA 2023), Trois-Rivières, QC, Canada. Published in Springer proceedings in earth and environmental sciences.
  - Balazinski, M., & Przybylo, A. (2023, June). Teaching manufacturing processes using computer animations [Paper]. SME/CIRP International Conference on Manufacturing Engineering Education, San Luis Obispo, Californie.
- 2018
  - Memarianpour, M., Niknam, S. A., Turenne, S., & Balazinski, M. (2018, December). Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718 [Paper]. International Conference on Advances in Engineering Research and Application (ICERA 2018), Thai Nguyen, Vietnam.
- 2016
  - Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2016, May). Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining [Paper]. 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany. Published in Procedia CIRP, 46.
- 2015
  - Shaban, Y., Yacout, S., Balazinski, M., Meshreki, M., & Attia, H. (2015, March). Diagnosis of machining outcomes based on machine learning with logical analysis of data [Paper]. International Conference on Industrial Engineering and Operations Management (IEOM 2015), Dubai, United Arab Emirates (8 pages).
  - Shaban, Y., Yacout, S., & Balazinski, M. (2015, January). Tool replacement based on pattern recognition with LAD [Paper]. Annual Reliability and Maintainability Symposium (RAMS 2015), Palm Harbor, FL (6 pages).
- 2014
  - Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2014, June). Burr Height Study for Drilling Carbon Epoxy Composite/Titanium/Aluminium Stacks [Paper]. Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing (JCM 2014), Toulouse France.
  - Xuan-Truong, D., Balazinski, M., & Mayer, J. R. R. (2014, November). Chaotic tool wear during machining of titanium metal matrix composite (TiMMCs) [Paper]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (9 pages).
  - Rimpault, X., Chatelain, J.-F., Sapieha, J.-E., & Balazinski, M. (2014, May). Cutting parameter impact on forces and on hole diameter while drilling CFRP/titanium/aluminium stacks [Paper]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta.
  - Shaban, Y., Aramesh, M., Yacout, S., Balazinski, M., Attia, H., & Kishawy, H. (2014, May). Optimal replacement of tool during turning titanium metal matrix composites [Paper]. IIE Annual Conference and Expo 2014, Montréal, Québec.
  - Aramesh, M., Shaban, Y., Balazinski, M., Attia, H., Kishawy, H. A., & Yacout, S. (2014, June). Survival life analysis of the cutting tools during turning titanium metal matrix composites (Ti-MMCs) [Paper]. 6th CIRP Conference on Performance Cutting (HPC 2014), Berkeley, Cal.. Published in Procedia CIRP, 14.
  - Aramesh, M., Shaban, Y., Balazinski, M., Attia, M. H., & Kishawy, H. A. (2014, May). Tool life prediction via survival life analysis of the cutting inserts during turning titanium metal matrix composites (TI-MMCs) [Paper]. 3rd International Conference on Virtual Machining Process Technology (VMPT 2014), University of Calgary, Calgary, Alberta.
- 2013
  - Bejjani, R., Balazinski, M., & Attia, H. (2013, May). Analysis of crack initiation and evolution when turning titanium MMC using a quick stop device and finite element simulation [Paper]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada.
  - Aramesh, M., Shi, B., Nassef, A. O., Attia, H., Balazinski, M., & Kishawy, H. A. (2013, June). Meta-modeling optimization of the cutting process during turning titanium metal matrix composites (Ti-MMCs) [Paper]. 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO 2013), Turin, Italy.
  - Aramesh, M., Shi, B., Balazinski, M., Attia, H. A., & Kishawy, H. (2013, May). On the tribological aspects of machining of titanium metal matrix composites (TI-MMCs) [Paper]. 2nd International Conference on Virtual Machining Process Technology (VMPT 2013), Hamilton, Ontario, Canada.
  - Klim, Z. H., Aramesh, M., Rimpault, X., & Balazinski, M. (2013, September). Wear Dependent tool reliability analysis during cutting titanium metal matrix composites (Ti-MMCs) [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2013), Montréal, Québec. Published in SAE International Journal of Aerospace, 6(2).
- 2012
  - Aramesh, M., Balazinski, M., Attia, H., & Kishawy, H. (2012, May). An experimental investigation on the deformation process during cutting titanium metal matrix composites (TiMMCs) [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
  - Bejjani, R., Balazinski, M., Attia, H., & Kishawy, H. (2012, May). A study on adiabatic shear banding in chip segmentation when cutting TiMMC [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
  - Guiassa, R., Mayer, J. R. R., & Balazinski, M. (2012, May). Continuous tool path compensation using discrete on machine measurement [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
  - Rouzmeh, S., Hoang, C., & Balazinski, M. (2012, May). Experimental study of the drilling burr formation in nickel alloy, Inconel 625 [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec.
- 2011
  - Aramesh, M., Balazinski, M., Attia, H., Kishawy, H., & Bejjani, R. (2011, September). A study on phase transformation and particle distribution during machining titanium metal matrix composites [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada.
  - Bejjani, R., Aramesh, M., Balazinski, M., Kishawy, H., & Attia, H. (2011, June). Chip morphology study of titanium metal matrix composites [Paper]. 23rd Canadian Congress of Applied Mechanics, Vancouver, Canada.
  - Klim, Z. H., Balazinski, M., & Komljenovic, D. (2011, May). Probabilistic approach limitations in the analysis of safety critical systems [Paper]. 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Stavanger, Norway.
  - Bejjani, R., Balazinski, M., Attia, H., Aramesh, M., & Kishawy, H. (2011, September). Segmentation and shear localization when turning titanium metal matrix composites [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, QC, Canada.
- 2010
  - Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2010, July). Acoustic emission signal feature analysis using type-2 fuzzy logic System [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2010), Toronto, Canada.
  - Bejjani, R., Balazinski, M., Shi, B., & Attia, H. (2010, May). A new design of quick stop device for research on chip formation [Paper]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada.
  - Pang, L., Kishawy, H. A., & Balazinski, M. (2010, May). GA based optimization for determining Johnson-Cook material parameters under orthogonal cutting conditions [Paper]. 38th Annual North American Manufacturing Research Conference (NAMRC 2010), Kingston, ON, Canada.
  - Ren, Q., Baron, L., Jemielniak, K., & Balazinski, M. (2010, July). Modelling of Dynamic Micromilling Cutting Forces Using Type-2 Fuzzy Rule-Based System [Paper]. IEEE International Conference on Fuzzy Systems, Barcelona, Spain.
- 2009
  - Ren, Q., Baron, L., & Balazinski, M. (2009, June). Application of Type-2 fuzzy estimation on uncertainty in machining: an approach on acoustic emission during turning process [Paper]. 28th North American Fuzzy Information Processing Society Annual Conference.
  - Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (2009, June). Fuzzy cutting force modeling in micro-milling using subtractive clustering for learning evaluation [Paper]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia.
  - Balazinski, M., Beaton, H., Klim, Z. H., & Peloquin, F. (2009, June). Hard Landing Indication System [Paper]. COMADEM 2009, San Sebastian, Spain.
  - Qun, R., Baron, L., Balazinski, M., & Jemielniak, K. (2009, June). Machinability of Titanium metal matrix composites [Paper]. 2nd International Conference Process Machine Interactions, Vancouver, British Columbia.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2009, May). Modeling and prediction of machines tools errors from circular tests [Paper]. CANCAM 2009, Halifax.
  - Ren, Q., Baron, L., & Balazinski, M. (2009, August). Type-2 TSK Fuzzy filtering and uncertainty estimation for acoustic emission in precision manufacturing [Paper]. International Symposium on Computational Intelligence, Honolulu, Hawaii.
  - Ren, Q., Balazinski, M., & Baron, L. (2009, October). Uncertainty prediction for tool wear condition using type-2 TSK fuzzy approach [Paper]. IEEE International Conference on Systems, Man and Cybernetics, San Antonio, Texas, USA.
- 2008
  - Achiche, S., Woźniak, A., Fan, Z., Balazinski, M., Baron, L., & Sørensen, T. (2008, May). 3D CMM strain-gauge triggering probe error characteristics modeling using fuzzy logic [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United states.
  - Ren, Q., Baron, L., & Balazinski, M. (2008, May). High order type-2 TSK fuzzy logic system [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States.
  - Qin, Z., Ren, Q., Baron, L., Balazinski, M., & Birglen, L. (2008, May). Joint friction identification for robots using TSK fuzzy system based on subtractive clustering [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2008), New York City, NY, United States.
  - Balazinski, M., Kavoliunas, M., & Klim, H. Z. (2008, June). Risk ranking tool based on the fuzzy methodology [Paper]. COMADEM 2008, Prague.
  - Ren, Q., Balazinski, M., Baron, L., & Jemielniak, K. (2008, June). Tool condition monitoring using the TSK fuzzy approach based on subtractive clustering method [Paper]. 21st International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, (IEA/AIE 2008), Wroclaw, Poland.
- 2007
  - Khoukhi, L., Baron, L., & Balazinski, M. (2007, May). An augmented lagrangian with projection technique to multi-objective trajectory planning of redundant manipulators [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec.
  - Khoukhi, A., Baron, L., & Balazinski, M. (2007, May). Application of augmented lagrangian to mulit-objective trajectory planning of mobile robots [Paper]. Conference on Systems and Control (CSC 2007), Marrakech, Morocco.
  - Woźniak, A., Balazinski, M., & Mayer, J. R. R. (2007, June). Application of fuzzy knowledge base for corrected measured point determination in coordinate metrology [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Aspects of the tool wear of carbide tools during high speed machining of aluminum alloys [Paper]. CANCAM 2007, Toronto, Ontario.
  - Klim, H. Z., Balazinski, M., & Szczepanski, P. (2007, June). Cascading failures analysis [Paper]. 7e Congrès international de génie industriel, Trois Rivières, Québec.
  - Szczepanski, P., Klim, H. Z., & Balazinski, M. (2007, June). Diagnostic des systèmes par la méthode de l'élimination [Paper]. 7e Congrès international de génie industriel, Trois Rivières, Québec.
  - Khoukhi, A., Baron, L., & Balazinski, M. (2007, June). Fuzzy parking manoeuvres of wheeled mobile robots [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Ren, Q., Qin, Z., Baron, L., Birglen, L., & Balazinski, M. (2007, June). Identification of rigid-body dynamics of robotic manipulators using type-2 fuzzy logic filter [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Slamani, M., Mayer, J. R. R., & Balazinski, M. (2007, June). Improving machine tool accuracy for high-speed orbital milling of holes [Paper]. CANCAM 2007, Toronto, Ontario.
  - Akrout, K., Baron, L., Balazinski, M., & Achiche, S. (2007, June). Influence of the migration process on the learning performances of fuzzy knowledge bases [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2007), San Diego, CA, United States.
  - Calatoru, V. D., Balazinski, M., & Mayer, J. R. R. (2007, June). Method for analyzing the effects of aluminum build-up on tungsten carbide tools behavior [Paper]. CANCAM 2007, Toronto, Ontario.
  - Klim, Z. H., & Balazinski, M. (2007, September). Methodology for the common mode analysis [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles.
  - Khoukhi, L., Baron, L., & Balazinski, M. (2007, June). Multi-objective trajectory planning for redundant manipulators [Paper]. 5th International Conference on Industrial Automation, Montréal, Québec.
  - Khoukhi, L., Baron, L., & Balazinski, M. (2007, May). Multi-objective trajectory planning for redundant manipulators using augmented lagrangian [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2007), Saint-Hubert, Québec.
  - Khoukhi, A., Baron, L., & Balazinski, M. (2007, May). Multi-Objective Trajectory Planning for Redundant Manipulators Using Gradient Projection and Augmented Lagrangian [Planification multi-objective de trajectoire des manipulateurs redondants par lagrangien augmenté]. [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert (12 pages).
  - Khoukhi, A., Demirli, K., Baron, L., & Balazinski, M. (2007, October). Neuro-Fuzzy multi-objective trajectory planning of redundant manipulators [Paper]. IEEE International Conference on Systems, Man and Cybernetics, Montréal, Québec.
  - Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2007, August). Pomiary ksztaltu ostrzy narzedzi skrawajacych przy pomocy wspolrzednosciowych maszyn pomiarowych [Paper]. Metrologia w technikach wytwarzania, XII Krajowa III Miedzynarodowa Konferencja Naukowo Techniczna, Poland.
  - Qun, R., Baron, L., & Balazinski, M. (2007, May). Sensitivity analysis for type-1 and type-2 TSK fuzzy models modcounterpart [Paper]. 18th IASTED, International Conference on Modelling and Simulation, Montréal, Québec.
- 2006
  - Khoukhi, A., Baron, L., & Balazinski, M. A Decoupled Approach to Optimal Time Energy Trajectory Planning of Parallel Kinematic Machines [Paper]. Robot Design, Dynamics, and Control (Romansy 2006).
  - Ben Mehni, A., Mascle, C., & Balazinski, M. (2006, May). Agility in high speed machining : optimisation between tool and holder [Paper]. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble.
  - Kannan, S., Kishawy, H. A., & Balazinski, M. (2006, October). Analysis of abrasive wear during machining metal matrix composites [Paper]. Aerospace Materials and manufacturing Process: Emerging Materials, Manufacturing and Repair Techniques, Montréal, Québec.
  - Slamani, M., Mayer, J. R. R., Balazinski, M., & Engin, S. (2006, June). Characterization of Machine Tools for Boring by Highspeed Orbital Milling [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada.
  - Khoukhi, A., Baron, L., Balazinski, M., & Demirli, K. (2006, June). Fuzzy-Neuro Optimal Time-Energy Control of a Three Degrees of Freedom Planar Manipulator [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Achiche, S., Woźniak, A., Balazinski, M., & Baron, L. (2006, June). Fuzzy rule base influence on genetic-fuzzy reconstruction of CMM 3D triggering probe error characteristic [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Wozniak, A., Mayer, J. R. R., Balazinski, M., & Côté, M. (2006, June). Investigation on Prescise Measurement of Cutting Tool Edges Using Coordinate Measuring Machines [Paper]. 2nd International Conference on High Performance Cutting, University of British Columbia, Vancouver, Canada.
  - Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (2006, April). Optimisation of the Constructed Wetland Design Using a Fuzzy-Knowledge Approach [Paper]. 35th WEAO Annual Technical Symposium and OPCEA Exhibition, Toronto.
  - Achiche, S., Przybylo, A., Balazinski, M., & Baron, L. (2006, June). Predefining numbers of fuzzy sets for genetically generated fuzzy knowledge bases using clustering techniques: Application for tool wear monitoring [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Achiche, S., Baron, L., & Balazinski, M. (2006, June). Predictive fuzzy control of paper quality [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
  - Ren, Q., Baron, L., & Balazinski, M. (2006, June). Type-2 Takagi-Sugeno-Kang Fuzzy Logic Modeling using Subtractive Clustering [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2006), Montréal, Québec.
- 2005
  - Smoczynska, A., Bartnicka, H., Balazinski, M., Achiche, S., Elektorowicz, M., & Smoczynski, L. (2005, March). Assessment of Zn and Cu effect of Cadmium sorption based on genetically generated fuzzy knowledge bases [Paper]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland.
  - Achiche, S., Baron, L., Balazinski, M., & Benaoudia, M. (2005, February). Chips image processing to predict pulp brightness using fuzzy logic techniques [Paper]. 91st Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC 2005).
  - Khoukhi, A., Baron, L., & Balazinski, M. (2005, May). Programmation dynamique temps énergie minimum des robots parallèles par lagrangien augmenté [Paper]. CCToMM Mechanisms, Machines, and Mechatronics Symposium (M3 2005), Saint-Hubert.
  - Klim, Z., & Balazinski, M. (2005, June). Risk assessment for continuing airworthiness [Paper]. 6e Congrès international de génie industriel, Besançon, France.
  - Smoczynska, A., Bojanowska, I., Balazinski, M., Achiche, S., & Elektorowicz, M. (2005, March). Zinc sorption to soil; application of an artificial intelligence method [Paper]. International Workshop on Fate and Impact of Persistent Polluents in the Agroecosystems, Pulawy, Poland.
- 2004
  - Przybylo, A., Achiche, S., Balazinski, M., & Baron, L. (2004, November). Enhancing fuzzy learning with data mining techniques [Paper]. Symposium on Methods of Artificial Intelligence (AI-METH 2004), Poland.
  - Dobrescu, E., & Balazinski, M. (2004, June). Fuzzy logic aircraft environment controller [Paper]. Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Canada.
  - Nault, M. L., Labelle, H., Aubin, C.-É., & Balazinski, M. (2004, June). Fuzzy logic as an aid to surgery planning in idiopathic scoliosis [Paper]. 5th International Research Society for Spinal Deformities Symposium (IRSSD 2004), Vancouver, Canada.
  - Achiche, S., Baron, L., & Balazinski, M. (2004, June). Scheduling exploration/exploitation levels in genetically-generated fuzzy knowledge bases [Paper]. 2004 annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 2004), Banff, Alta., Canada.
- 2003
  - Elektorowicz, M., Qasaimeh, A., & Balazinski, M. (2003, June). Assessment of the capability of metal sorption to sediments of natural systems using fuzzy knowledge [Paper]. 8th Environmental and Sustainable Engineering Specially Conference of the Canadian Society for Civil Engineering, Moncton, New Brunswick.
  - Achiche, S., Baron, L., & Balazinski, M. (2003, June). Real/binary-like coded genetic algorithm to automatically generate fuzzy knowledge bases [Paper]. 4th International Conference on Control and Automation (ICCA 2003), Montréal, Québec.
- 2002
  - Furet, B., Hascoët, J.-Y., & Balazinski, M. (2002, January). A Concurrent Engineering Project: Application In Integrated Mechanical Design [Paper]. ASEE Annual Conference and Exposition, Montréal, Québec.
  - Balazinski, M., & Przybylo, A. (2002, January). Animations as support for the teaching of the manufacturing [Paper]. ASEE Annual Conference and Exposition, Montréal, Québec.
  - Sinzinkayo, A., Mascle, C., & Balazinski, M. Application of Fuzzy Logic for an Assembly Methodology [Paper]. Integrated Design and Manufacturing in Mechanical Engineering.
  - Elektorowicz, M., Balazinski, M., & Qasaimeh, A. (2002, January). Application of the artificial intelligence to estimate the constructed wetland response to heavy metal removal [Paper]. Joint CSCE/ASCE International Conference on Environmental Engineering, Niagara Falls, Ontario.
  - Balazinski, M., Baron, L., & Achiche, S. (2002, May). Rule-set optimization in genetically-generated fuzzy knowledge bases [Paper]. Optimization Days 2002, Montréal, Québec.
- 2001
  - Balazinski, M., Achiche, S., & Baron, L. (2001, July). Application of genetically-generated fuzzy knowledge bases in manufacturing [Paper]. Joint 9th IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, BC, Canada.
  - Balazinski, M., Achiche, S., & Baron, L. (2001, July). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Paper]. IFSA World Congress and 20th NAFIPS International Conference of the North American Fuzzy Information Processing Society, Vancouver, Canada.
  - Balazinski, M., Achiche, S., Baron, L., Elektorowicz, M., & El-Agroudy, A. (2001, June). Investigation of constructed wetlands efficiency in mercury removal using genetically generated fuzzy knowledge bases [Paper]. 7th Specialty Conference on Environmental Engineering, Victoria, B.C..
  - Songmene, V., & Balazinski, M. (2001, January). Machining of graphitic SiC-reinforced aluminium metal matrix composites with diamond tools [Paper]. PRIME 2001, Sestri Levante (Genoa), Italy.
- 2000
  - Sinzinkayo, A., Mascle, C., & Balazinski, M. (2000, January). Application de la logique floue pour le choix d'une méthode d'assemblage [Paper]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec.
  - Sinzinkayo, A., Mascle, C., & Balazinski, M. (2000, January). Fuzzy logic application to choose an assembly method [Paper]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec.
  - Achiche, S., Balazinski, M., & Baron, L. (2000, May). Génération automatique par un algorithme génétique de bases de connaissances pour un système d'aide à la décision [Paper]. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal, Québec.
  - Wygowski, W., & Balazinski, M. (2000, January). Improvement of tapping accuracy through multicriteria choice of technological parameters [Paper]. 2nd International Conference on Advanced Manufacturing Technology, Johor Bahru, Malaysia.
  - Balazinski, M., Achiche, S., & Baron, L. (2000, January). Influence of optimization and selection criteria on genetically generated fuzzy knowledge bases [Paper]. 2nd International Conference on Advanced Manufacturing Technology, Johor, Malaysia.
  - Jemielniak, K., & Balazinski, M. (2000, January). Laboratory versus industrial cutting force sensor in tool condition monitoring [Paper]. 11th CIRP Sponsored Workshop on Supervising and Diagnostic of Machining Systems, Karpacz, Poland.
  - Songmene, V., & Balazinski, M. (2000, January). Milling and drilling of graphical metal matrix composite [Paper]. Materials machining (OM 2000), Cracow.
- 1999
  - Sobol, W., Korwin, M., Balazinski, M., & Veillette, S. (1999, January). Fuzzy logic control of industrial heat treatment furnaces [Paper]. 18th Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS 1999), New York, USA.
  - Mascle, C., & Balazinski, M. (1999, June). Logique floue en conception d'assemblage [Paper]. 3e conférence internationale sur l'automatisation industrielle, Montréal, Québec.
- 1998
  - Balazinski, M., Czogala, E., Leski, J., Drwal, G., Czabanski, R., & Kowalczyk, R. (1998, September). Decision support system Fuzzy-Flou with improved defuzzification methods as a tool for fuzzy control [Paper]. 6th European Congress on Intelligent Techniques and Soft Computing (EUFIT 1998), Aachen, Germany.
  - Balazinski, M., Gravelle, S., & Trochu, F. (1998, January). Évaluation de la distance entre les passes d'usinage pour les outils à bout torique [Paper]. 2e conférence internationale sur la conception et la fabrication intégrées en mécanique (IDMME 1998), Compiègne, France.
  - Balazinski, M., Czogala, E., Crwal, G., Kowalczyk, R., & Leski, J. (1998, January). Fuzzy decision support system FUZZY-FLOU-the tool processing imperfect information [Paper]. World Automation Congress, Anchorage, Alaska, USA.
  - Balazinski, M., Kops, L., & Massicotte, P. (1998, January). Job dispatching using priority factors and fuzzy logic [Paper]. CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Capri, Italy.
  - Mpakp, C., & Balazinski, M. (1998, January). New method of varying feed during machining in order to reduce tool waer during the rough turning of 4140 steel [Paper]. CSME Forum, Toronto, Ontario.
  - Balazinski, M., & Jemielniak, K. (1998, January). Tool condition monitoring using fuzzy decision support system [Paper]. 5th International Conference on Monitoring and Automatic Supervision in Manufacturing, Warsaw, Poland.
- 1997
  - Balazinski, M., Boyer, H., Czogala, E., & Drwal, G. (1997, July). Constructive and destructive fuzzy decision support system (FDSS) processing uncertain information [Paper]. 6th IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 1997), Barcelona, Spain.
  - Kajl, S., Balazinski, M., & Czogala, E. (1997, July). Evaluation of school buildings energy consumption using fuzzy assistant operating uncertain knowledge [Paper]. 6th IEEE International Conference on Fuzzy Systems (FUZZ IEEE 1997), Barcelona, Spain.
  - Balazinski, M., Boyer, H., Czogala, E., & Drwal, G. (1997, September). Extended FDSS FUZZY-FLOU - the tool for processing uncertain knowledge [Paper]. 5th European Congress on Intelligent Techniques and Soft Computing (EUFIT 1997), Aachen, Germany.
  - Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (1997, July). Interactive computer aided process planning system for manufacturing, assembly and inspection [Paper]. 32nd International MATADOR Conference, Manchester, U.K..
  - Balazinski, M., Czogala, E., Mayer, J. R. R., & Shen, Y. (1997, January). Pre-travel compensation of kinematic touch trigger probes using fuzzy decision support system [Paper]. 7th IFSA World Congress, Prague.
- 1996
  - Balazinski, M., Boyer, H., & Czogala, E. (1996, January). Application of fuzzy intelligent control to an automatic parachute guiding system [Paper]. 4th International Fuzzy Systems and Intelligent Control Conference, Maui, Hawaii.
  - Balazinski, M., Czogala, E., Drwal, G., & Mrozek, M. (1996, September). Fuzzy decision support system "FUZZY-FLOU" operating uncertain knowledge [Paper]. 5th IEEE International Fuzzy Systems, New Orleans, Louisiana.
  - Anh Dung, N., Malinowski, P., Kajl, S., & Balazinski, M. (1996, January). Fuzzy logic approach to manual material handling tasks [Paper]. 5th International Conference on Human Aspects of Advanced Manufacturing, Maui, Hawaii, USA.
  - Balazinski, M., & Plaza, M. (1996, January). Impact of feed variation on chip instability and tool waer [Paper]. CSME Forum, Hamilton.
  - Ennajimi, E., Fortin, C., Balazinski, M., & Kraftchenko, I. (1996, January). Modélisation de l'erreur d'usinage due aux déplacements élastiques du système machine-pièce-outil [Paper]. Conférence internationale sur les mathématiques appliquées et les sciences de l'ingénieur (CIMASI 1996), Casablanca, Maroc.
  - Labonté, F., Balazinski, M., & Cohen, P. (1996, January). Study on eye movement strategies for a depth discrimination task in a "pseudo"natural context" [Paper]. ARVO Annual Meeting, Fort Lauderdale, FL, USA.
  - Balazinski, M., Klim, Z., & Vinet, R. (1996, January). Utilisation de la logique floue pour noter les exposés oraux [Paper]. Congrès canadien de l'éducation en ingénierie, Kingston, Canada.
- 1995
  - Klim, Z., Balazinski, M., Maranzana, R., & Songméné, V. (1995, January). Analyse de l'influence des paramètres de coupe dur la fiabilité des outils [Paper]. Congrès international de génie industriel de Montréal, Montréal, Québec.
  - Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (1995, January). Applying the new tools to the building heating load prediction [Paper]. 2nd International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, Montréal, Québec.
  - Mir, Y. A., Balazinski, M., & Mayer, R. (1995, January). Automatic CNC machining of complex surfaces by digitalisation [Paper]. 3rd Annual Conference of Iranian Association of Mechanical Engineering, Tehran, Iran.
  - Mayer, J. R. R., Mir, Y. A., & Balazinski, M. (1995, January). Automatic digitizing of sculptured parts with coordinate measuring machines [Paper]. 6th International Conference on Industrial Metrology in Metromatica, Zaragoza, Spain.
  - Balazinski, M., Czogala, E., & Gravelle, S. (1995, March). Automatic tool selection using a fuzzy decision support system [Paper]. IEEE International Conference on Fuzzy Systems, Yokohama, Japan.
  - Balazinski, M., & Klim, Z. (1995, January). Étude sur l'application de la logique floue pour la prédiction de la maintenance préventive [Paper]. Congrès international de génie industriel de Montréal, Montréal, Québec.
  - Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (1995, January). Fuzzy logic and neural networks a approach to thermal description of buildings [Paper]. 3rd European Congress on Intelligent Techniques and Soft Computing (EUFIT 1995), Aachen, Germany.
  - Balazinski, M., & Kops, L. (1995, February). Intelligent job allocation on machine tools using fuzzy logic [Paper]. 1st World Congress on Intelligent Manufacturing Processes and Systems, Mayaguez/San Juan, Puerto Rico.
  - Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (1995, January). Modeling of sculptured surfaces from touch probe measurements [Paper]. 2nd International Conference on the Concurrent Engineering, Potomac.
  - Taras, A. R., Iordanescu, M., Balazinski, M., & McClure, G. (1995, June). Nondestructive evaluation of the residual strength of wood utility poles [Paper]. CSCE Annual Conference :12th Canadian Hydrotechnical Conference, 2nd Engineering Materials Symposium, 1st CSCE Construction Specialty Conference, Ottawa (Canada).
  - Kajl, S., Malinowski, P., Czogala, E., & Balazinski, M. (1995, March). Prediction of building thermal performance using fuzzy decision support system [Paper]. FUZZ-IEEE/IFES 1995, Yokohama, Japan.
  - Mir, Y. A., Mayer, J. R. R., & Balazinski, M. (1995, January). Rapid programming of coordinate measuring machine for digitizing sculptured surface parts [Paper]. Congrès international de génie industriel de Montréal, Montréal, Québec.
  - Balazinski, M., & Mir, Y. A. (1995, January). Selecting of machining parameters by fuzzy logic techniques [Paper]. 3rd Annual Conference of Iranian Association of Mechanical Engineering, Tehran, Iran.
- 1994
  - Balazinski, M., & Czogala, E. (1994, January). Application of neural networks to selection of operating parameters in machining processes [Paper]. 1st National Conference of Neural Networks, Kule, Poland.
  - Balazinski, M., Gravelle, S., & Trochu, F. (1994, August). Automatic process planning using a fuzzy logic expert system [Paper]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada.
  - Balazinski, M., Bellerose, M., & Czogala, E. (1994, January). Choice and modification of cutting parameters in machining processes using fuzzy decision support system (fdss) [Paper]. 32nd Symposium on Modelling in Mechanics, Poland.
  - Balazinski, M., Bellerose, M., & Czogala, E. (1994, January). Choice of cutting parameters in machining using fuzzy logic methods [Paper]. CSME Forum, Montréal, Québec.
  - Balazinski, M., Czogala, E., & Kajl, S. (1994, June). Fuzzy control of ventilation process in air-ventilated closed areas with emission of noxious gasses [Paper]. 3rd IEEE International Conference on Fuzzy Systems, Orlando, FL, USA.
  - Mascle, C., Balazinski, M., & Czogala, E. (1994, January). Fuzzy logic selection process for assembly sequences [Paper]. CSME Forum, Montréal, Québec.
  - Balazinski, M., Czogala, E., & Gravelle, S. (1994, January). Fuzzy logic techniques in the automatic manufacturing of molds [Paper]. International Fuzzy Systems and Intelligent Control Conference, Louisville, KY, USA.
  - Balazinski, M., Czogala, E., Kajl, S., & Roberge, M. A. (1994, January). FUZZY prediction of building cooling load [Paper]. CSME Forum, Montréal, Québec.
  - Balazinski, M., Ennajimi, E., & Fortin, C. (1994, January). Influence of the feed variation on tool wear in interrupted cutting conditions [Paper]. CSME Forum, Montréal, Québec.
  - Kajl, S., Czogala, E., Balazinski, M., & Roberge, M. A. (1994, January). Rooms temperature stabilisation using a fuzzy approach [Paper]. Healthy Buildings 1994 CIB-ISIAQ-HAS conference, Budapest, Hungary.
  - Balazinski, M., Mascle, C., & Czogala, E. (1994, August). Selection of the best assembly sequences using fuzzy logic [Paper]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada.
  - Dupinet, É., & Balazinski, M. (1994, August). Tolerance allocation using fuzzy logic [Paper]. 10th ISPE/IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada.
- 1993
  - Balazinski, M., Bellerose, M., & Czogala, E. (1993, July). Decision support system for cutting parameters selection in machining processes using fuzzy knowledge [Paper]. 5th IFSA world Congress, Seoul, Korea.
Book chapters (5)
- 2014
  - Niknam, S. A., Wygowski, W., Balazinski, M., & Songmené, V. (2014). Milling Burr Formation and Avoidance. In Machinability of Advanced Materials (pp. 57-93).
- 2013
  - Ren, Q., Baron, L., Balazinski, M., & Jemielniak, K. (2013). Reliable Tool Life Estimation with Multiple Acoustic Emission Signal Feature Selection and Integration Based on Type-2 Fuzzy Logic. In Sadeghian, A., Mendel, J. M., & Tahayori, H. (eds.), Advances in Type-2 Fuzzy Sets and Systems (pp. 203-217).
- 2011
  - Balazinski, M., Songmené, V., & Kishawy, H. A. (2011). Analyzing the machinability of metal matrix composites. In Machining Technology for Composite Materials: Principles and Practice (pp. 394-411).
- 2007
  - Ben Mhenni, A., Mascle, C., & Balazinski, M. (2007). Agility in High Speed Machining: Optimization between Tool and Holder. In Advances in Integrated Design and Manufacturing in Mechanical Engineering II (pp. 475-488).
- 2001
  - Balazinski, M., Achiche, S., & Baron, L. (2001). Fuzzy knowledge base generation and optimization using a genetic algorithm. In Zbiory rozmyte i ich zastosowania (pp. 453-467).
Reports (1)
- 1997
  - Gou, M., Klim, Z., & Balazinski, M. (1997). Development and documentation of EMSA decision sub-module for RO/LO electric power generation system variants. (Technical Report n° P2195).

Directory of Experts

Balazinski, Marek

Directory of Experts

Balazinski, Marek

You are here

Publications by type

Marek Balazinski (254)