Directory of Experts

Lévesque, Martin

Directory of Experts

Lévesque, Martin

Directory of Experts

Publications by type

Journal article (130) Conference paper (123) Book Book chapter (2) Patent Report (27) Thesis (2) Dataset (4) Teaching resource Image Audio recording Video recording Other

Martin Lévesque (288)

Journal articles (130)
- 2025
  - Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Flexural properties of sandwich panels fabricated by filament-extrusion of high-temperature thermoplastic composites. Composites Science and Technology, 263, 111106 (12 pages).
  - Arslan, D., Mihai, M., Therriault, D., & Lévesque, M. (2025). Formulation and characterization of polyetherimide composites reinforced with recycled carbon fibers and thermal black particles for Fused filament fabrication. Composites Part A Applied Science and Manufacturing, 194, 108946 (12 pages).
- 2024
  - Pierre, J., Verville, M., Chenier, G., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2024). Non-planar material-extrusion additive manufacturing of multifunctional sandwich structures using carbon-reinforced polyetheretherketone (PEEK). Additive Manufacturing, 84, 104124 (13 pages).
  - Sushitskii, V., Miao, H., Lévesque, M., & Gosselin, F. (2024). Segmentation of peen forming patterns using k-means clustering. Journal of Manufacturing Processes, 119, 867-877.
  - Sushitskii, V., Dubois, P.-O., Miao, H., Lévesque, M., & Gosselin, F. (2024). Simulation and automation of aluminum panel shot peen forming. International Journal of Material Forming, 17(3), 21-21.
  - Bouscarrat, D., Lévesque, M., & Vieille, B. (2024). Time-dependent damage development during creep in carbon woven-ply polyphenylene sulfide laminates above the glass transition temperature. Journal of Composite Materials.
  - Lingua, A., Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2024). X-Ray Tomography-Based Characterization of the Porosity Evolution in Composites Manufactured by Fused Filament Fabrication. Experimental Mechanics.
- 2023
  - Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications. Composites Science and Technology, 231, 9 pages.
  - Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages).
  - Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages).
  - Sushitskii, V., van Rees, W. M., Lévesque, M., & Gosselin, F. (2023). Determination of Optimal Shot Peen Forming Patterns Using the Theory of Non-Euclidean Plates. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 145(3), 031006 (15 pages).
  - Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 10 pages.
  - Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 109343 (19 pages).
  - Sosa-Rey, F., Vella, C., Lingua, A., Pierre, J., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Multiscale Fast Fourier Transform homogenization of additively manufactured fiber reinforced composites from component-wise description of morphology. Composites Science and Technology, 243, 110261 (16 pages).
  - Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages).
  - Lampron, O., Therriault, D., & Lévesque, M. (2023). Phase-field modeling of fracture in fused filament fabricated thermoplastic parts and experimental validation. Engineering Fracture Mechanics, 292, 109667 (19 pages).
  - Moeini, M., Yue, L., Begon, M., & Lévesque, M. (2023). Surrogate optimization of a lattice foot orthotic. Computers in Biology and Medicine, 155, 106376 (20 pages).
  - Sosa-Rey, F., Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Thermo-viscoelastic multiscale homogenization of additively manufactured short fiber reinforced polymers from direct microstructure characterization. International Journal of Solids and Structures, 281, 13 pages.
- 2022
  - Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Hérard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages.
  - Moeini, M., Menard, A.-L., Yue, L., Hajizadeh, M., Begon, M., & Lévesque, M. (2022). Computationally efficient model to predict the deformations of a cellular foot orthotic. Computers in Biology and Medicine, 146, 105532 (16 pages).
  - Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445.
  - Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages).
  - Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages).
  - Langot, J., Chávez-Gómez, P., Lévesque, M., & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), 262-276.
  - Moeini, M., Begon, M., & Lévesque, M. (2022). Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results. Mechanics of Materials, 167, 104210 (17 pages).
  - Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages.
  - Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699.
  - Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages).
  - Faucheux, P., Miao, H., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages).
  - Miao, H., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77.
- 2021
  - Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages.
  - Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169.
  - Turcot, G., Paquet, D., Lévesque, M., & Turenne, S. (2021). A novel inverse methodology for the extraction of bulk elasto-plastic tensile properties of metals using spherical instrumented indentation. International Journal of Solids and Structures, 236-237, 20 pages.
  - Breumier, S., Trudeau-Lalonde, F., Lafrance, T., Robert, É., Villani, A., Kermouche, G., & Lévesque, M. (2021). Controlled single and repeated impact testing for material plastic behaviour characterisation under high strain rates. Strain, 57(6), 28 pages.
  - Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages).
  - Breumier, S., Adamski, F., Badreddine, J., Lévesque, M., & Kermouche, G. (2021). Microstructural and mechanical characterization of a shot peening induced rolled edge on direct aged Inconel 718 alloy. Materials Science and Engineering A, 816, 10 pages.
  - Hamidpour, M., Nami, M. R., Khosravifard, A., & Lévesque, M. (2021). Modeling fracture in viscoelastic materials using a modified incremental meshfree RPIM and DIC technique. European Journal of Mechanics - A/Solids, 92, 52 pages.
  - Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages).
  - Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2021). On the tri-dimensional constitutive theory identification of linearly viscoelastic solids based on Bayesian framework. International Journal of Solids and Structures, 230-231, 19 pages.
  - Praud, F., Schmitt, T., Zabeida, O., Maïza, S., Martinu, L., & Lévesque, M. (2021). Phase field fracture models to predict crack initiation and propagation in anti-reflective coatings. Thin Solid Films, 736, 14 pages.
- 2020
  - Diehl, P., Jha, P. K., Kaiser, H., Lipton, R., & Lévesque, M. (2020). An asynchronous and task-based implementation of peridynamics utilizing HPX—the C++ standard library for parallelism and concurrency. SN Applied Sciences, 2(12), 2144 (21 pages).
  - Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages.
  - Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (2020). Experimental and numerical study of pneumatic needle peening effects on Aluminium Alloy 2024-T3. Journal of Materials Processing Technology, 275, 116370 (12 pages).
  - Delorme, R., Diehl, P., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2020). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamic framework. Journal of Peridynamics and Nonlocal Modeling, 2(2), 111-135.
  - Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification. Materials and Design, 193, 17 pages.
  - Bouscarrat, D., Lévesque, M., & Vieille, B. (2020). Influence of time-dependent phenomena on translaminar fracture of woven-ply C/PPS laminates above the glass transition temperature. Composites Part B: Engineering, 180, 11 pages.
  - Bretin, R., Lévesque, M., Pilvin, P., & Bocher, P. (2020). Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue, 137, 16 pages.
- 2019
  - Diehl, P., Prudhomme, S., & Lévesque, M. (2019). A Review of Benchmark Experiments for the Validation of Peridynamics Models. Journal of Peridynamics and Nonlocal Modeling, 1(1), 14-35.
  - Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843.
  - Breumier, S., Villani, A., Maurice, C., Lévesque, M., & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169.
  - Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages).
  - Canals, L., Badreddine, J., McGillivray, B., Miao, H., & Lévesque, M. (2019). Effect of vibratory peening on the sub-surface layer of aerospace materials Ti-6Al-4V and E-16NiCrMo13. Journal of Materials Processing Technology, 264, 91-106.
  - Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284.
  - Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages.
  - Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377.
  - Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67.
  - Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48.
  - Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74.
  - Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138.
- 2018
  - Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281.
  - Klotz, T., Miao, H., Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened Inconel 718. International Journal of Fatigue, 113, 204-221.
  - Bianchetti, C., Zheng, R., Chromik, R. R., Lévesque, M., & Brochu, M. (2018). Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Engineering Fracture Mechanics, 202, 20-32.
  - Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366.
  - Tabiai, I., Delorme, R., Therriault, D., & Lévesque, M. (2018). In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load. Experimental Mechanics, 58(9), 1451-1467.
  - Diehl, P., Tabiai, I., Baumann, F. W., Therriault, D., & Lévesque, M. (2018). Long term availability of raw experimental data in experimental fracture mechanics. Engineering Fracture Mechanics, 197, 21-26.
  - Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2018). Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing. Composites Part A: Applied Science and Manufacturing, 107, 205-216.
  - Bianchetti, C., Lévesque, M., & Brochu, M. (2018). Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T7451. International Journal of Fatigue, 111, 289-298.
  - Faucheux, P. A., Gosselin, F., & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, 135-144.
  - Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21.
  - Courtois, A., Hirsekorn, M., Benavente, M., Jaillon, A., Marcin, L., Ruiz, E., & Lévesque, M. (2018). Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling. Journal of Composite Materials, 53(2), 155-171.
- 2017
  - Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212.
  - Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2017). 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. Mechanics of Materials, 109, 34-41.
  - Delorme, R., Tabiai, I., Laberge Lebel, L., & Lévesque, M. (2017). Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity. Mechanics of Time-Dependent Materials, 21(4), 549-575.
  - Gariépy, A., Miao, H., & Lévesque, M. (2017). Simulation of the shot peening process with variable shot diameters and impacting velocities. Advances in Engineering Software, 114, 121-133.
  - Benavente, M., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017). Viscoelastic distortion in asymmetric plates during post curing. Composites Part A: Applied Science and Manufacturing, 103(Supplement), 122-130.
- 2016
  - Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2016). Corrigendum to “Shot peening and peen forming finite element modelling - Towards a quantitative method”. International Journal of Solids and Structures, 83, 183-183.
  - El Mourid, A., Ganesan, R., Brochu, M., & Lévesque, M. (2016). Effect of temperature on the failure modes of a triaxially braided polymer matrix composite. International Journal of Solids and Structures, 97-98, 1-15.
  - Dalir, H., Farahani, R. D., Hernandez, L., Aldebert, C., Lévesque, M., & Therriault, D. (2016). Three-Dimensional Dielectrophoretic Microparticle Separator Fabricated by Ultraviolet-Assisted Direct-Write Assembly. Journal of Nanoscience and Nanotechnology, 16(1), 765-771.
- 2015
  - El Mourid, A., Ganesan, R., Brochu, M., Crochon, T., & Lévesque, M. (2015). Anisotropic oxidation due to aging in a triaxially braided composite and its influence on tensile failure. Composites Part B: Engineering, 76, 1-12.
  - Favre, A., Fotsing, E.-R., Lévesque, M., & Ruiz, E. (2015). Comparative study of fiber-reinforced elastomer composites subjected to accelerated aging in water. Jounal of Elastomers and Plastics, 47(8), 719-737.
  - Ghossein, E., & Lévesque, M. (2015). Homogenization models for predicting local field statistics in ellipsoidal particles reinforced composites: Comparisons and validations. International Journal of Solids and Structures, 58, 91-105.
  - Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. (2015). Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds. Advanced Materials, 27(24), 3676-3680.
  - Montesano, J., Selezneva, M., Lévesque, M., & Fawaz, Z. (2015). Modeling fatigue damage evolution in polymer matrix composite structures and validation using in-situ digital image correlation. Composite Structures, 125, 354-361.
  - Mann, P., Miao, H., Gariépy, A., Lévesque, M., & Chromik, R. R. (2015). Residual stress near single shot peening impingements determined by nanoindentation and numerical simulations. Journal of Materials Science, 50(5), 2284-2297.
- 2014
  - Ghossein, E., & Lévesque, M. (2014). A comprehensive validation of analytical homogenization models: The case of ellipsoidal particles reinforced composites. Mechanics of Materials, 75, 135-150.
  - Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2014). Average electro-mechanical properties and responses of active composites. Computational Materials Science, 82, 405-414.
  - Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46.
  - Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650.
  - Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2014). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation. Optics and Lasers in Engineering, 55, 44-52.
  - Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2014). In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method. International Journal of Solids and Structures, 51(18), 3076-3086.
  - Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72.
  - Pahlavanpour, M., Hubert, P., & Lévesque, M. (2014). Numerical and Analytical Modeling of the Stiffness of Polymer-Clay Nanocomposites With Aligned Particles: One- and Two-Step Methods. Computational Materials Science, 82, 122-130.
  - Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855.
  - Rahmani, B., Villemure, I., & Lévesque, M. (2014). Regularized virtual fields method for mechanical properties identification of composite materials. Computer Methods in Applied Mechanics and Engineering, 278, 543-566.
- 2013
  - Rahmani, B., Mortazavi, F., Villemure, I., & Lévesque, M. (2013). A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating. Composite Structures, 105, 1160-125.
  - Moussaddy, H., Therriault, D., & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828.
  - El Mourid, A., Ganesan, R., & Lévesque, M. (2013). Comparison between analytical and numerical predictions for the linearly viscoelastic behavior of textile composites. Mechanics of Materials, 58, 69-83.
  - Gariépy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). Erratum: On the Effect of the Peening Trajectory in Shot Peen Forming. Finite Elements in Analysis and Design, 74, 111-111.
  - Gariépy, A., Bridier, F., Hoseini, M., Bocher, P., Perron, C., & Lévesque, M. (2013). Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351. Surface and Coatings Technology, 219, 15-30.
  - Mortazavi, F., Lévesque, M., & Villemure, I. (2013). Image-based continuous displacement measurements using an improved spectral approach. Strain, 49(3), 233-248.
  - Luk-Cyr, J., Crochon, T., Li, C., & Lévesque, M. (2013). Interconversion of linearly viscoelastic material functions expressed as Prony series: A closure. Mechanics of Time-Dependent Materials, 17(1), 53-82.
  - Gariépy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the orientation of sheet rolling direction in shot peen forming. Journal of Materials Processing Technology, 213(6), 926-938.
  - Gariépy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the peening trajectory in shot peen forming. Finite Elements in Analysis and Design, 69, 48-61.
  - Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., & Lévesque, M. (2013). Prediction of elastic properties in polymer-clay nanocomposites: Analytical homogenization methods and 3D finite element modeling. Computational Materials Science, 79, 206-215.
  - Ghossein, E., & Lévesque, M. (2013). Random Generation of Periodic Hard Ellipsoids Based on Molecular Dynamics: a Computationally-Efficient Algorithm. Journal of Computational Physics, 253, 471-490.
  - Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2013). Stress relaxation of swine growth plate in semi-confined compression: Depth dependent tissue deformational behavior versus extracellular matrix composition and collagen fiber organization. Biomechanics and Modeling in Mechanobiology, 12(1), 67-78.
- 2012
  - Ghossein, E., & Lévesque, M. (2012). A fully automated numerical tool for a comprehensive validation of homogenization models and its application to spherical particles reinforced composites. International Journal of Solids and Structures, 49(11-12), 1387-1398.
  - Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8), 085502 (10 pages).
  - Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, 214-225.
  - Wosu, R., Sergerie, K., Lévesque, M., & Villemure, I. (2012). Mechanical properties of the porcine growth plate vary with developmental stage. Biomechanics and Modeling in Mechanobiology, 11(3-4), 303-312.
  - Gariépy, A., Cyr, J., Levers, A., Perron, C., Bocher, P., & Lévesque, M. (2012). Potential applications of peen forming finite element modelling. Advances in Engineering Software, 52, 60-71.
  - Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), 791-803.
  - Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M., & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), 1387-1395.
- 2011
  - Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2011). Coupled heat conduction and thermal stress analyses in particulate composites. Mechanics of Materials, 43(10), 608-625.
  - Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919.
  - Miao, H., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975.
  - Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2011). Shot peening and peen forming finite element modelling-towards a quantitative method. International Journal of Solids and Structures, 48(20), 2859-2877.
- 2010
  - Miao, H., Larose, S., Perron, C., & Lévesque, M. (2010). An analytical approach to relate shot peening parameters to Almen intensity. Surface and Coatings Technology, 205(7), 2055-2066.
  - Miao, H., Demers, D., Larose, S., Perron, C., & Lévesque, M. (2010). Experimental study of shot peening and stress peen forming. Journal of Materials Processing Technology, 210(15), 2089-2102.
  - Crochon, T., Schönherr, T., Li, C., & Lévesque, M. (2010). On finite-element implementation strategies of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 14(4), 359-387.
- 2009
  - Lourdel, N., Therriault, D., & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9), 095017 (7 pages).
  - Sergerie, K., Lacoursière, M.-O., Lévesque, M., & Villemure, I. (2009). Mechanical properties of the porcine growth plate and its three zones from unconfined compression tests. Journal of Biomechanics, 42(4), 510-516.
  - Miao, H., Larose, S., Perron, C., & Lévesque, M. (2009). On the potential applications of a 3D random finite element model for the simulation of shot peening. Advances in Engineering Software, 40(10), 1023-1038.
- 2008
  - Barello, R. B., & Lévesque, M. (2008). Comparison Between the Relaxation Spectra Obtained From Homogenization Models and Finite Elements Simulation for the Same Composite. International Journal of Solids and Structures, 45(3-4), 850-867.
  - Burlat, M., Julien, D., Lévesque, M., Bui-Quoc, T., & Bernard, M. (2008). Effect of Local Cold Working on the Fatigue Life of 7475-T7351 Aluminium Alloy Hole Specimens. Engineering Fracture Mechanics, 75(8), 2042-2061.
  - Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). Erratum: On the development and parameter identification of Schapery-type constitutive theories. Mechanics of Time-Dependent Materials, 12(3), 273-274.
  - Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. D. (2008). On the Development and Parameter Identification of Schapery-Type Constitutive Theories. Mechanics of Time-Dependent Materials, 12(2), 95-127.
- 2007
  - Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (2007). Numerical Inversion of the Laplace-Carson Transform Applied to Homogenization of Randomly Reinforced Linear Viscoelastic Media. Computational Mechanics, 40(4), 771-789.
- 2006
  - O'Dowd, F., Lévesque, M., & Gilchrist, M. D. (2006). Analysis of fibre orientation effects on injection moulded components. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(12), 1909-1921.
- 2004
  - Lévesque, M., Derrien, K., Mishnaevski Jr, L., Baptiste, D., & Gilchrist, M. D. (2004). A micromechanical model for nonlinear viscoelastic particle reinforced polymeric composite materials : Undamaged state. Composites Part A: Applied Science and Manufacturing, 35(7-8), 905-913.
Conference papers (123)
- 2023
  - Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2023, March). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Paper]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA.
  - Arslan, D., Norton, E., Mihai, M., Lévesque, M., & Therriault, D. (2023, May). High-temperature thermoplastic composites reinforced with recycled carbon fibers and thermal black for Fused Filament Fabrication [Presentation]. In Thirty-Eight Polymer Processing Society Conference (PPS-38), St.Gallen, Switzerland.
  - Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023, July). Mesoscale full-field measurements for 3D-printed composites under delamination [Presentation]. In 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom.
- 2022
  - Bouscarrat, D., Calvat, M., Vieille, B., & Lévesque, M. (2022, June). Analyses of time-dependent damage within carbon woven-ply reinforced thermoplastic composites laminates at high temperature [Paper]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.
  - Paques, M., Chouchane, K., Changeux, B., De la Torre, L., Badreddine, J., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2022, September). Control of the vibratory peening machine using the Almen intensity procedure [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy.
  - De la Torre, L., Miao, H., Changeux, B., Badreddine, J., Turenne, S., & Lévesque, M. (2022, September). Discrete elements method simulation of the movement of media and the velocity between the media and treated parts during the vibratory peening process [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy (6 pages).
  - Miao, H., Singhal, M., Lévesque, M., & Martin, É. (2022, September). Experimental investigation of controlled single and repeated impact testing of shot peening on Ti-6Al-4V, 300M and AA7050-T7451 [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy.
  - Das, A., Chouchane, K., Miao, H., Changeux, B., Badreddine, J., Turenne, S., Lévesque, M., & Martin, É. (2022, September). Impact of Vibratory Peening on the Surface Integrity of Cemented Steel E16NCD13 [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy (6 pages).
  - Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (2022, June). In-situ full-field measurements for 3D printed composites under interlayer delamination [Paper]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland.
  - Sadallah, A., Badreddine, J., Changeux, B., Turenne, S., Miao, H., Lévesque, M., & Martin, É. (2022, September). The effect of high temperature shot peening on the surface integrity of 2024-T351 aluminum alloy [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy (5 pages).
- 2021
  - Abderrafai, Y., Diouf Lewis, A., Pierre, J., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2021, September). 3D printing challenge of high processing temperature composite materials [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).
  - Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (2021, June). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Abstract]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada.
  - Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). In-situ full-field measurements for additively manufactured polymers undergoing delamination [Abstract]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page).
  - Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Paper]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada.
  - Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (2021, September). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Paper]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US.
- 2019
  - Breumier, S., Sao-Joao, S., Villani, A., Baltazar, J., Lévesque, M., & Kermouche, G. (2019, September). Nanomechanical testing for crystal plasticity constitutive framework identification at high strain rates [Abstract]. VII Nanomechanical Testing in Materials Research and Development, Melia Costa Del Sol, Malaga, Spain (1 page).
- 2018
  - Diehl, P., Prudhomme, S., & Lévesque, M. (2018, January). A review for benchmark experiments against peridynamic models [Presentation]. In Nonlocal Methods in Fracture, Austin, USA.
  - Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (2018, June). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Presentation]. In 18th U.S. National Congress for Theoretical and Applied Mechanics, Chicago, USA.
  - Diehl, P., Delorme, R., Tabiai, I., & Lévesque, M. (2018, May). Extracting constitutive mechanical parameters in linear elasticity using the virtual fields method within the ordinary state-based peridynamics framework [Presentation]. In Optimization Days 2018, Montréal, Canada.
- 2017
  - Delbergue, D., Lévesque, M., & Bocher, P. (2017, September). About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles [Paper]. 13th International Conference on Shot Peening, Montréal, Québec.
  - Klotz, T., Delbergue, D., Miao, H., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Analytical fatigue life prediction of shot peened Inconel 718 [Presentation]. In 13th International Conference on Shot Peening, Montréal, Québec.
  - Miao, H., Canals, L., McGilivray, B., & Lévesque, M. (2017, September). Comparison between vibratory peening and shot peening process [Presentation]. In 13th International Conference of Shot Peening, Montréal, Québec.
  - Faucheux, P. A., Gosselin, F., & Lévesque, M. (2017, September). Computing peening patterns for peen forming and distortion correction [Presentation]. In 13th International Conference on Shot Peening, Montréal, Québec.
  - Bianchetti, C., Lévesque, M., & Brochu, M. (2017, September). Effect of shot peening on the fatigue life of AA 7050-T7451 [Paper]. 13th International Conference on Shot Peening, Montréal, Québec.
  - Miao, H., Mendez Romero, J. A., Forgues, S., & Lévesque, M. (2017, September). Experimental and numerical study of needle peening effects in aluminum alloy 2024-T3 sheets [Presentation]. In 13th International Conference of Shot Peening, Montréal, Québec.
  - Diehl, P., Tabiai, I., & Lévesque, M. (2017, July). Experimental validation of elastic state based peridynamic for PMMA and epoxy materials [Presentation]. In 14th U.S. National Congress on Computational Mechanics (USNCCM14), Montréal, Canada.
  - Miao, H., Klotz, T., Delbergue, D., & Lévesque, M. (2017, September). Finite element simulation of shot peened residual stress relaxation under low and high cycle loading [Presentation]. In 13th International Conference of Shot Peening, Montréal, Québec.
  - Benavente, M., Marcin, L., Lévesque, M., & Ruiz, E. (2017, July). Geometrical instabilities in asymmetric plates reinforced with 3D interlock fabrics [Paper]. Cancom 2017, Ottawa, Ontario.
  - Bag, A., Lévesque, M., & Brochu, M. (2017, June). Investigation on the effect of shot peening on short fatigue crack growth in a high strength steel [Presentation]. In 29th Canadian Materials Science Conference, Ottawa, Canada.
  - Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2017, August). Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite [Paper]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China.
  - Benavente, M., Marcin, L., Godon, T., Lévesque, M., & Ruiz, E. (2017, August). Modelling of geometrical instabilities in asymmetric composite plates reinforced with 3D interlock fabrics [Presentation]. In 21st International Conference on Composite Materials, Xi.
  - Benavente, M., Godon, T., Marcin, L., Courtois, A., Lévesque, M., & Ruiz, E. (2017, August). Modelling of geometrical instabilities in asymmetric composites plates reinforced with 3D interlock fabrics [Paper]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China (9 pages).
  - Miao, H., Tu, F., Delbergue, D., Bianchetti, C., Klotz, T., Bag, A., & Lévesque, M. (2017, September). Shot peening DEM-FEM simulation considering shot stream expansion, peening intensity and target materials [Paper]. 13th International Conference of Shot Peening, Montréal, Québec.
  - Castro Moreno, A., Tu, F., Lévesque, M., & Bocher, P. (2017, September). Shot peening FEM simulation: A novel approach based on crystal plasticity [Paper]. 13th International Conference on Shot Peening, Montréal, Québec.
  - Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Study of short crack growth in shot peened 300M steel [Paper]. 13th International Conference on Shot Peening, Montréal, Québec.
- 2016
  - Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2016, August). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Paper]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages).
  - Bretin, R., Bocher, P., & Lévesque, M. (2016, August). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Paper]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif..
  - Ruiz, E., Courteau-Godmaire, H., Fotsing, R., Billotte, C., & Lévesque, M. (2016, June). Experimental and numerical analysis of defects in composite panels used in business aircrafts interior [Paper]. 8th International Conference on Times of Polymers and Composites: from Aerospace to Nanotechnology, Naples, Italy (4 pages).
  - Bouscarrat, D., Flipon, B., Vieille, B., Lévesque, M., Barbe, F., & Gautrelet, C. (2016, May). Influence of time-dependent behaviors on the determination of the critical strain energy release rate Gₗc of woven-ply carbon fibers polyphenylene sulfide thermoplastic composites at high temperature [Presentation]. In 10th International Conference on the Mechanics of Time Dependent Materials, Paris, France.
  - Courtois, A., Hirsekorn, M., Marcin, L., Vernet, N., Ruiz, E., & Lévesque, M. (2016, May). Viscoelastic behavior of an epoxy resin during cure : characterization and modeling [Paper]. 10th International Conference on Mechanics of Time-Dependent Materials, Paris, France.
- 2015
  - Bag, A., Lévesque, M., & Brochu, M. (2015, August). Analytical fatigue life prediction of shot-peened 300M steel [Presentation]. In Conference of Metallurgist (COM2015), Toronto, Canada.
  - Filipon, B., Bouscarrat, D., Vieille, B., Barbe, F., Gautrelet, C., & Lévesque, M. (2015, June). Couplage entre comportement visqueux et endommagement dans un stratifié tissé à matrice thermoplastique C/PPS à T>Tg [Presentation]. In 19es Journées nationales sur les composites, Lyon, France.
  - Chapelle, L., Lévesque, M., Brøndsted, P., Foldschack, M. R., & Kusano, Y. (2015, July). Generation of non-overlapping fiber architecture [Paper]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Danemark.
  - Klotz, T., Blas, S., Lévesque, M., & Brochu, M. (2015, August). Modelling of Inconel 718 crack tip's plastic zone softening during crack propagation [Presentation]. In Conference of Metallurgist (COM2015), Toronto, Canada.
  - Courteau-Godmaire, H., Fotsing, E. R., Causse, P., Lévesque, M., & Ruiz, E. (2015, July). Numerical modeling of resin shrinkage around insert in composite sandwich panels [Paper]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark.
  - Crochon, T., Li, C., & Lévesque, M. On time-temperature-dependent viscoelastic behavior of an amorphous polyimide [Paper]. Unspecified.
  - Bianchetti, C., Lévesque, M., & Brochu, M. (2015, June). Prédiction analytique de l'effet du grenaillage sur la vie en fatigue de l'alliage d'aluminium 7050 [Presentation]. In Journée des étudiants du REGAL, Québec, Canada.
- 2014
  - El-Mourid, A., Ganesan, R., & Lévesque, M. (2014, May). Ageing influence on the failure of textile composites at elevated temperatures [Presentation]. In 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec.
  - Bourgeois Collin, L., Villemure, I., & Lévesque, M. (2014, May). On the relevance of using homogeneous biphasic models to characterize the mechanical behavior of the growth plate [Paper]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Published in Mechanics of Time-Dependent Materials, 19(3).
  - Lévesque, M., Miao, H., Gariépy, A., & Levers, A. (2014, September). Prediction of shot peen forming through direct finite element simulation [Paper]. 12th International Conference on Shot Peening, Goslar, Germany.
  - Miao, H., Lebon, R., Lévesque, M., & Bocher, P. (2014, September). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Paper]. 12th International Conference on Shot Peening, Goslar, Germany.
  - Crochon, T., & Lévesque, M. (2014, May). Time-temperature behaviour of MVK-10 matrix [Paper]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec.
- 2013
  - Rahmani, B., Villemure, I., & Lévesque, M. (2013, May). A new regularized model updating approach for accurate mechanical properties identification of composite materials [Paper]. Photomechanics, Montpellier, France.
  - Rahmani, B., Villemure, I., & Lévesque, M. (2013, July). A new regularized virtual fields method for composite material parameters identification [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2013, July). 3D full-field displacements/strains measurements in composites at micro-scale [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Guerin, N., Lévesque, M., & Therriault, D. (2013, May). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Paper]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states.
  - Dulong, S., Lévesque, M., Li, C., & Vadean, A. (2013, July). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Mortazavi, F., Canal, L. P., Gonzalez, C., Llorca, J., Villemure, I., & Lévesque, M. (2013, May). Fullfield micro-strain measurements in composites by a hybrid spectral approach [Paper]. Photomechanics, Montpellier, France.
  - Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2013, July). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Pahlavanpour, M., Hubert, P., & Lévesque, M. (2013, July). Homogenization models for Polymer-Clay nanocomposites : one- and two-step approaches [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Chatel, T., Lévesque, M., & Therriault, D. (2013, May). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Paper]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec.
  - Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2013, September). Mechanical Properties Identification of Particulate Composites Constitutive Materials using Virtual Fields Method [Paper]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states.
  - Moussaddy, H., Therriault, D., & Lévesque, M. (2013, July). Modeling elastic properties of randomly oriented fiber composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Ghossein, E., & Lévesque, M. (2013, July). Numerical validation of homogenization models for the case of ellipsoidal particles reinforced composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Montesano, J., Fawaz, Z., Lévesque, M., & Poon, C. J. (2013, July). Predicting fatigue damage development for braided carbon fiber polymer matrix composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Trudel, A., Lévesque, M., & Brochu, M. (2013, June). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Paper]. 13th International Conference on Fracture, Beijing, China (10 pages).
  - El Mourid, A., Ganesan, R., & Lévesque, M. (2013, July). Time and temperature influence on the failure of textile composites [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Crochon, T., Dulong, S., Li, C., & Lévesque, M. (2013, July). Time-temperature behavior of a thermo-setting polymer matrix [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
  - Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (2013, July). Underwater accelerated aging of elastomeric composite materials [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec.
- 2012
  - Gariépy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Peen Forming Simulation [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA.
  - Gariépy, A., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA.
  - Gosselin, F., Therriault, D., & Lévesque, M. (2012, February). Microfabrication of a spider-silk analogue through the liquid rope coiling instability [Paper]. APS March Meeting, Boston, MA, USA.
  - Farahani, R. D., Lévesque, M., & Therriault, D. (2012, March). Nanocomposite materials in three-dimensional freestanding microsensors [Paper]. NanoQuebec, Montréal, Québec.
  - Miao, H., & Lévesque, M. (2012, November). Shot peening for fatigue life improvement and forming of aerospace structures [Paper]. Research and Innovation for Transport Systems of the Future (RITF 2012), Paris, France.
  - Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2012, November). The effect of microstructural morphologies on the effective electromechanical properties of piezoelectric particle composites [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2012), Houston, TX, United states.
- 2011
  - Ghossein, E., & Lévesque, M. (2011, September). A fully automated tool for a comprehensive validation of analytical homogenization models [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Moussaddy, H., Lévesque, M., & Therriault, D. (2011, September). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Miao, H., & Lévesque, M. (2011, September). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Paper]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA.
  - Rahmani, B., Villemure, I., & Lévesque, M. (2011, September). Elastic properties identification of planar composite materials based on finite element model updating and a hybrid optimization algorithm [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Moussaddy, H., Lévesque, M., & Therriault, D. (2011, June). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Paper]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France.
  - Miao, H., & Lévesque, M. (2011, April). Experimental study and numerical simulation of the stress peen forming process [Paper]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec.
  - Miao, H., & Lévesque, M. (2011, August). Experimental study of shot peening and stress peen forming [Paper]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec.
  - Crochon, T., Li, C., & Lévesque, M. (2011, September). Finite-Element implementation of Schapery-type constitutive theories based on an internal variables approach [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Mortazavi, F., Lévesque, M., & Villemure, I. (2011, June). Improved spectral approach for continuous displacement measurement from digital images [Paper]. SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut.
  - Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011, September). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Pahlavanpour, M., Hubert, P., & Lévesque, M. (2011, June). Modèles d'homogénéisation pour des nanocomposites à base de nanoargiles [Paper]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France.
  - El Mourid, A., Ganesan, R., & Lévesque, M. (2011, September). Modeling of the linearly viscoelastic behavior of a braided composite [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Pahlavanpour, M., Hubert, P., & Lévesque, M. (2011, September). Multiscale modeling of polymer-clay nanocomposites : interphase and homogenization methods [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Miao, H., & Lévesque, M. (2011, April). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Paper]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec.
  - Mortazavi, F., Lévesque, M., & Villemure, I. (2011, September). On the application of a hybrid spectral approach to the image-based measurement of displacements at micro-scale in composites [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Miao, H., & Lévesque, M. (2011, September). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Paper]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA.
  - El Mourid, A., Ganesan, R., & Lévesque, M. (2011, June). Prédiction du comportement viscoélastique de matériaux composites textiles par une approche d'homogénéisation [Paper]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France.
  - Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (2011, May). Sequence-sensitive peen forming modelling [Paper]. ASME Applied Mechanics and Materials (McMat 2011), Chicago, IL, USA.
  - Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2011, May). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Paper]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec.
  - Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011, September). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
  - Ghossein, E., & Lévesque, M. (2011, June). Un outil complètement automatisé pour l'évaluation en profondeur des performances des modèles d'homogénéisation [Paper]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France.
  - Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011, September). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Paper]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec.
- 2010
  - Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (2010, November). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Presentation]. In ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia.
  - Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2010, June). Coupled heat conduction and thermal stresses in particulate composites [Paper]. 16th US National Congress on Theoretical and Applied Mechanics, State College, Pennsylvania, USA.
  - Crochon, T., Li, C., & Lévesque, M. (2010, September). Finite-element implementation of constitutive theories [Paper]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia.
  - Sabourin, M., Thibault, D., Bouffard, D.-A., & Lévesque, M. (2010, September). Hydraulic runner design method for lifetime [Paper]. 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania. Published in International Journal of Fluid Machinery and Systems, 3(4).
  - Woscu, R., Sergerie, K., Lacoursiere, M.-O., Lévesque, M., & Villemure, I. (2010, October). Les propriétés mécaniques intrisèques de la plaque de croissance porcine varient avec les stades développementaux [Paper]. 40e Réunion annuelle de la Société de scoliose du Québec, Burlington, VT.
  - Farahani, R., Dalir, H., Lévesque, M., & Therriault, D. (2010, November). Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada.
  - Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (2010, November). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Paper]. MRS Fall Meeting, Boston, MA. Published in MRS Proceedings, 1312.
  - Sabourin, M., Thibault, D., Bouffard, D.-A., & Lévesque, M. (2010, September). New parameters influencing runner life [Paper]. 25th IARH Symposium on Hydraulic Machinery and Systems, Timisoara, Romania.
  - Landry, F., Crochon, T., Li, C., & Lévesque, M. (2010, September). Thermomechanical behavior of a polymer resin [Paper]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Portorož, Slovenia.
  - Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (2010, November). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada.
- 2009
  - Miao, H., Perron, C., & Lévesque, M. (2009, May). Finite element simulation and experimental study of stress peen forming process [Paper]. CASI Aircraft Design and Development Symposium, Kanata, Canada.
  - Khan, K. A., Gudlur, P., Barello, R., Muliana, A. H., & Lévesque, M. (2009, June). Heat conduction and thermal stresses in particulate composites [Paper]. 8th International Congress on Thermal Stresses, Urbana-Champaign, Illinois, USA.
- 2008
  - Miao, H., Perron, C., & Lévesque, M. (2008, September). Finite element simulation of shot peening and stress peen forming [Paper]. 10th International Conference on Shot Peening, Tokyo, Japan.
  - Lévesque, M., Derrien, K., Baptiste, D., & Gilchrist, M. (2008, March). On the development and parameter identification of Schapery-type constitutive theories [Paper]. Mechanics of Time-Dependent Materials Conference (MTDM 2008), Monterey, California.
  - Lévesque, M., & Barello, R. B. (2008, October). On the homogenization of nonlinearly viscoelastic composite materials [Paper]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), Boston, MA, United states.
- 2007
  - Barello, R. B., & Lévesque, M. (2007, June). Comparaison du spectre de relaxation des composites obtenu à partir des modèles d'homogénéisation et des simulations éléments finis [Paper]. 15es Journées nationales sur les composites, Marseille, France.
  - Miao, H., Lévesque, M., Perron, C., & Larose, S. (2007, September). 3D random finite element model for shot peening process [Paper]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles, California.
  - Miao, H., Larose, S., Lévesque, M., & Perron, C. (2007, April). Finite element models of shot peening processes [Paper]. CASI Aero 2007, Toronto, Canada.
  - Lévesque, M., Gilchrist, M. D., Bouleau, N., Derrien, K., & Baptiste, D. (2007, June). Inversion numérique des transformées de Laplace-Carson rencontrées dans les problèmes d'homogénéisation [Paper]. 15es Journées nationales sur les composites, Marseille, France.
- 2006
  - Barello, R. B., & Lévesque, M. (2006, December). Modélisation de la décohésion interface renfort-matrice dans un matériau composite [Poster]. 2e colloque annuel du CREPEC, Montréal, Québec.
- 2005
  - Lévesque, M., Derrien, K., Mishnawvsky, L., Baptiste, D., & Gilchrist, M. D. (2005, August). Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation [Paper]. 17e Congrès français de mécanique, Troyes, France.
- 2004
  - Lévesque, M., Derrien, K., Mishnaevsky, L. J., Baptiste, D., & Gilchrist, M. (2004, May). Mechanical behaviour predictions of nonlinear viscoelastic composite materials by a homogenisation of random mixtures approach [Paper]. European Conference on Composite Materials (ECCM 2004), Rhodes, Greece.
- 2003
  - Lévesque, M., Derrien, D., Baptiste, D., & Gilchrist, M. D. (2003, September). Modélisation du comportement mécanique de composites à matrice viscoélastique non linéaire et à renforts discontinus par une approche micromécanique [Paper]. Congrès français de mécanique, Nice, France.
- 2002
  - Lévesque, M., Byrne, G., & Gilchrist, M. D. (2002, June). Design and performance of a lightweight composite seat for civil aircraft applications [Paper]. European Conference on Composite Materials (ECCM 2002), Bruges, Belgium.
- 2000
  - Lévesque, M., & Gilchrist, M. D. (2000, June). A statistical data reduction technique for the tensile testing of unidirectional composite materials [Paper]. Euromech Solid Mechanics Conference, Metz, France.
  - Lévesque, M., & Gilchrist, M. D. (2000, May). Computational analysis of tabbing fixtures for composite coupon tests [Paper]. Annual Symposium of the Irish Society for Scientific and Engineering Computation (ISSEC), Dublin, Ireland.
Book chapters (2)
- 2014
  - Gariépy, A., Miao, H., & Lévesque, M. (2014). Peen forming. In Hashmi, S. (ed.), Comprehensive Materials Processing. Volume 3, Advanced Forming Technologies (pp. 295-329).
- 2003
  - Lévesque, M., Gilchrist, M. D., & Fisa, B. (2003). A Theoretical study of the tensile test for highly anisotropic composite materials. In International, A. S. T. M. (ed.), ASTM Special Technical Publication (pp. 320-335).
Reports (27)
- 2023
  - Farahani, R. D., Lévesque, M., & Therriault, D. (2023). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).
- 2022
  - Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).
  - Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Technical Report).
  - Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Technical Report).
  - Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).
- 2021
  - Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).
  - Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Technical Report).
  - Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).
  - Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Technical Report).
- 2020
  - Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Technical Report).
  - Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2020). Objective 2: Predict mechanical response of AM composites. (Technical Report).
  - Lebedev, O. V., Trofimov, A., Lévesque, M., & Therriault, D. (2020). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).
- 2019
  - Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Technical Report).
  - Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Technical Report).
- 2017
  - Miao, H., & Lévesque, M. (2017). Fatigue life improvement on AA7050 by vibratory peening and shot peening. (Technical Report).
  - Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part I. (Technical Report).
  - Canals, L., & Lévesque, M. (2017). Vibratory peening for the fatigue life improvement of aerospace parts. Part II. (Technical Report).
- 2016
  - Lévesque, M., Chassé, M. C., Mehrez, E., & Bonneville, E. (2016). Collaboration pour des équipements et expertises de recherche. (Technical Report).
  - Miao, H., & Lévesque, M. (2016). Literature review on three warm surface treatment processes : warm shot peening, warm laser shock peening and warm deep rolling. (Technical Report).
- 2013
  - Miao, H., Gariépy, A., & Lévesque, M. (2013). Peen forming simulation of an A320 bottom wing skin panel #1. (Technical Report).
- 2011
  - Bui-Quoc, T., Julien, D., & Lévesque, M. (2011). Étude du comportement en fatigue propagation de l'acier A-514 a l'air ambiant. (Technical Report).
- 2010
  - Lévesque, M., Bui-Quoc, T., & Therriault, D. (2010). Final Report – Pratt & Whitney specialized bi-axial fatigue testing specimens. (Technical Report).
  - Lévesque, M., Bui-Quoc, T., Therriault, D., & Lourdel, N. (2010). Task 1 Report – Bi-axial fatigue setup and testing for Pratt & Whitney US. (Technical Report).
- 2009
  - Bui-Quoc, T., Lévesque, M., & Julien, D. (2009). Étude du comportement en fatigue-propagation d'un acier martensitique CA6NM en eau douce. (Technical Report).
  - Lévesque, M., Therriault, D., & Nowlan, I. (2009). Wedge clamp verification testing. (Technical Report).
- 2008
  - Bui-Quoc, T., Lévesque, M., & Julien, D. (2008). Tensile and fatigue tests on plymetal assemblies. (Technical Report).
- 2007
  - Bui-Quoc, T., Julien, D., & Lévesque, M. (2007). Effet d'une déformation plastique combinée au grenaillage sur le comportement statique et en fatigue de l'aluminium 7475-T7351. (Technical Report).
Theses (2)
- 2004
  - Lévesque, M. (2004). Modélisation du comportement mécanique de matériaux composites viscoélastiques non linéaires par une approche d'homogénéisation [Ph.D. Thesis, École Nationale Supérieure d'Arts et Métiers].
- 2000
  - Lévesque, M. (2000). L'essai de traction de matériaux composites unidirectionnels à fibres continues [Master's thesis, École Polytechnique de Montréal].
Datasets (4)
- 2022
  - Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). Supplementary material for 'In-situ full-field measurements for 3D printed polymers during mode I interface failure' [Dataset].
- 2020
  - Breumier, S., Sao-Joao, S., Villani, A., Lévesque, M., & Kermouche, G. (2020). High strain rate micro-compression for crystal plasticity constitutive law parameters identification [Dataset].
  - Breumier, S., Kermouche, G., & Lévesque, M. (2020). Shot peening test rig test database [Dataset].
- 2019
  - Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding [Dataset].

Directory of Experts

Lévesque, Martin

Directory of Experts

Lévesque, Martin

You are here

Publications by type

Martin Lévesque (288)